QL rubber keypad sticking
QL rubber keypad sticking
I just came across a sweet QL, and have ordered a new keyboard mylar from the UK. A few of the keys, however, don't pop back after being pressed, it seems the rubber is becoming a bit stale.
My initial thought is to paint some rubber cement onto the rubber domes with the aim to make it a bit more resilient, although I'm not certain this will fix things. If that doesn't work I'm thinking of adding springs between the outer key and the rubber. Again, no idea if this will help.
Has anyone overcome this issue?
The QL also came with a 896K Trump Card, but no floppy drive. Can I use a Gotek?
Hopefully the system's NTSC output won't prevent PAL software running. I'm going to put together a SCART cable to see if I can convert to HDMI.
My initial thought is to paint some rubber cement onto the rubber domes with the aim to make it a bit more resilient, although I'm not certain this will fix things. If that doesn't work I'm thinking of adding springs between the outer key and the rubber. Again, no idea if this will help.
Has anyone overcome this issue?
The QL also came with a 896K Trump Card, but no floppy drive. Can I use a Gotek?
Hopefully the system's NTSC output won't prevent PAL software running. I'm going to put together a SCART cable to see if I can convert to HDMI.
- vanpeebles
- Commissario Pebbli
- Posts: 2822
- Joined: Sat Nov 20, 2010 7:13 pm
- Location: North East UK
-
- RWAP Master
- Posts: 2847
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: QL rubber keypad sticking
Normally, washing in hot soapy water and then rubbing the dry mat between your hands (to get some natural oil onto the rubber from your skin) fixes this issue.
I do have a pile of salvaged rubber mats though - price £4 each plus postage
I do have a pile of salvaged rubber mats though - price £4 each plus postage
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: QL rubber keypad sticking
They do get a bit gummy after a while and warm soapy water does help them. DO NOT let them come into contact with petroleum distillates, as this will destroy them. This includes things like WD40 and Vaseline. The material will break down very quickly.
If the QL has been in a sunny place the phthalates in the bubble mat evaporate. They lose their flexibility and start to become stiffer. Replacement is indicated.
From high school chemistry I understand a little bit of unbuffered wintergreen oil (methyl salicylate) mixed 3:1 with alcohol used as a soak for 5-7 days can help.
If the QL has been in a sunny place the phthalates in the bubble mat evaporate. They lose their flexibility and start to become stiffer. Replacement is indicated.
From high school chemistry I understand a little bit of unbuffered wintergreen oil (methyl salicylate) mixed 3:1 with alcohol used as a soak for 5-7 days can help.
Re: QL rubber keypad sticking
...you had an interesting chem class. I think when the RWAP mylar arrives I'll do the wash suggestion, if that doesn't do the trick, I'll try the oils, thanks all for your help.Dave wrote:a little bit of unbuffered wintergreen oil (methyl salicylate) mixed 3:1 with alcohol used as a soak for 5-7 days can help.
Re: QL rubber keypad sticking
There was a decided focus on alcohol. Oh, wait, that was college in general!towmater wrote:...you had an interesting chem class.
-
- RWAP Master
- Posts: 2847
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: QL rubber keypad sticking
As I say, the natural oils in your skin always seem to be enough when I have had problems..towmater wrote:...you had an interesting chem class. I think when the RWAP mylar arrives I'll do the wash suggestion, if that doesn't do the trick, I'll try the oils, thanks all for your help.Dave wrote:a little bit of unbuffered wintergreen oil (methyl salicylate) mixed 3:1 with alcohol used as a soak for 5-7 days can help.
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: QL rubber keypad sticking
While I'm waiting for the keyboard mylar, I pieced together a SCART to HDMI setup. I have no idea if the Gotek will work yet.
Does anyone have an opinion about the Trump revision 1.2a? I have found a 1.36 revision on the web, and could update the rom if it is worth the trouble.
No idea whereCare/Qjump is, hopefully not in the same eprom as Trump 1.26, as that could complicate things.
Does anyone have an opinion about the Trump revision 1.2a? I have found a 1.36 revision on the web, and could update the rom if it is worth the trouble.
No idea whereCare/Qjump is, hopefully not in the same eprom as Trump 1.26, as that could complicate things.