Sandy SuperQBoard firmware.

prime · Post by **prime** » Sun Feb 23, 2014 11:28 pm

Hi all,

I'm just in the process of adding the extra chips to my Sandy SuperQBoard to support the mouse port. However the onboard firmware doesn't have the driver for the mouse built in, does anyone have a copy of the firmware that I could program to the card once the upgrade is finished ?

Cheers,

Phill.

Dave · Post by **Dave** » Mon Feb 24, 2014 3:10 am

I have a copy of the ROM you need. It'll give me an excuse to try out my new EPROM programmer.

prime · Post by **prime** » Fri Feb 28, 2014 7:11 pm

Dave wrote:I have a copy of the ROM you need. It'll give me an excuse to try out my new EPROM programmer.

Hi Dave, did you manage to dump the firmware ?

Cheers.

Phill.

Dave · Post by **Dave** » Fri Feb 28, 2014 7:57 pm

Hi Phill,

Sorry, not yet. I've been busy burning the GALs and EPROMS for Minerva. I'll do it this evening and post it here.

:deep sense of personal shame for being a slacker:

prime · Post by **prime** » Fri Feb 28, 2014 8:01 pm

Dave wrote:Hi Phill,

Sorry, not yet. I've been busy burning the GALs and EPROMS for Minerva. I'll do it this evening and post it here.

:deep sense of personal shame for being a slacker:

No probs

Cheers.

Phill.

Ralf R. · Post by **Ralf R.** » Tue Mar 11, 2014 5:36 pm

Hi Phill,

I have a few SQB ROM images incl. what you may need. Drop me your email, so I can send this to you.

Cheers...Ralf

Dave · Post by **Dave** » Tue Mar 11, 2014 6:39 pm

If you send them to me also, I will post them on my website for download - I have rights to the images. You're welcome to send them to others too.

It would also help me out in producing non-QIMI floppy interfaces, as I don't have a non-QIMI image.

Obligatory:
This statement does not release any rights Sandy Electronics may have. Sandy's rights are reserved.

RWAP · Post by **RWAP** » Tue Mar 11, 2014 7:27 pm

Dilwyn has some too - I think the versions I sent to him are

v1.21 Y (with mouse support)
v1.19

What were the last versions of the ROM?

Ralf R. · Post by **Ralf R.** » Wed Mar 12, 2014 7:48 am

Aha...but not on his site...?!

Cheers...Ralf

prime · Post by **prime** » Wed Mar 12, 2014 10:15 am

RWAP wrote:Dilwyn has some too - I think the versions I sent to him are

v1.21 Y (with mouse support)
v1.19

I also sent Dilwyn :

Superdisk 1.16 AG and SuperQboard 1.19N

These announce as :

SANDY SUPERDISK v1.16 AG (C) 1984
Sandy Disk Controller V1.19N (C) 1984

These are the ones that MESS currently supports.

Cheers.

Phill.

The Sinclair QL Forum

Sandy SuperQBoard firmware.

Sandy SuperQBoard firmware.

Re: Sandy SuperQBoard firmware.

Re: Sandy SuperQBoard firmware.

Re: Sandy SuperQBoard firmware.

Re: Sandy SuperQBoard firmware.

Re: Sandy SuperQBoard firmware.

Re: Sandy SuperQBoard firmware.

Re: Sandy SuperQBoard firmware.

Re: Sandy SuperQBoard firmware.

Re: Sandy SuperQBoard firmware.