Bottom case

Looking for that hard to find item? Post here!
HAOUI
Bent Pin Expansion Port
Posts: 89
Joined: Tue Dec 14, 2010 2:17 pm

Bottom case

Postby HAOUI » Thu Dec 10, 2020 10:12 am

Hi all,
I am looking for a bottom case of a BBQL (only the base case, empty) in order to rebuild mine.
If anyone has a broken machine, I'd delighted to buy this part and pay all fees (to be sent to Paris).
Regards,
Alain


Derek_Stewart
Font of All Knowledge
Posts: 2206
Joined: Mon Dec 20, 2010 11:40 am
Location: Runcorn, Cheshire, UK

Re: Bottom case

Postby Derek_Stewart » Sat Dec 12, 2020 9:38 am

Hi Alain,

I have QL spares parts including cases, I can supply you a bottom case, send me a PM if you are interested

I have just been in hospital having a Throat Operation,so am on a little voice rest and recovery from the anesthetic.

Also there is another dead line, the UK comes to the end of the Brexit Transition period, is ending on 31/12/20. If no trade deal then EU import tax will be applied to all UK imports. What mess these so called politicians have made of this, 4 years to say no... typical upper class conservative idiots.


Regards,

Derek
User avatar
NormanDunbar
Forum Moderator
Posts: 1382
Joined: Tue Dec 14, 2010 9:04 am
Location: Leeds, West Yorkshire, UK
Contact:

Re: Bottom case

Postby NormanDunbar » Sat Dec 12, 2020 10:09 am

Get well soon Derek.

As for brexit ......... the public were sold lie after lie after lie, by both sides. The Tories have fscked it all up. Oven ready deal anyone?

Urgh! Too early for politics, sorry.

Cheers,
Norm.


Why do they put lightning conductors on churches?
Author of Arduino Software Internals - https://www.amazon.co.uk/Arduino-Softwa ... 1484257898, https://www.apress.com/gb/book/9781484257890
User avatar
Cristian
Aurora
Posts: 813
Joined: Mon Feb 16, 2015 1:40 pm
Location: Veneto

Re: Bottom case

Postby Cristian » Sat Dec 12, 2020 12:21 pm

Derek_Stewart wrote: I have just been in hospital having a Throat Operation

Get well soon & stay safe Derek!


HAOUI
Bent Pin Expansion Port
Posts: 89
Joined: Tue Dec 14, 2010 2:17 pm

Re: Bottom case

Postby HAOUI » Sun Dec 13, 2020 5:28 pm

Derek_Stewart wrote:Hi Alain,

I have QL spares parts including cases, I can supply you a bottom case, send me a PM if you are interested

I have just been in hospital having a Throat Operation,so am on a little voice rest and recovery from the anesthetic.

Also there is another dead line, the UK comes to the end of the Brexit Transition period, is ending on 31/12/20. If no trade deal then EU import tax will be applied to all UK imports. What mess these so called politicians have made of this, 4 years to say no... typical upper class conservative idiots.


Thank you Derek for your proposal.
I well reciept your mail and answred it.
All my wishes for a good recovery.
Alain


Derek_Stewart
Font of All Knowledge
Posts: 2206
Joined: Mon Dec 20, 2010 11:40 am
Location: Runcorn, Cheshire, UK

Re: Bottom case

Postby Derek_Stewart » Wed Dec 23, 2020 8:18 pm

HAOUI wrote:
Derek_Stewart wrote:Hi Alain,

I have QL spares parts including cases, I can supply you a bottom case, send me a PM if you are interested

I have just been in hospital having a Throat Operation,so am on a little voice rest and recovery from the anesthetic.

Also there is another dead line, the UK comes to the end of the Brexit Transition period, is ending on 31/12/20. If no trade deal then EU import tax will be applied to all UK imports. What mess these so called politicians have made of this, 4 years to say no... typical upper class conservative idiots.


Thank you Derek for your proposal.
I well reciept your mail and answred it.
All my wishes for a good recovery.
Alain

Hi Alain,

I am okay, where I live is not too much of risk compared to the rest of UK. But I have been docially distantancing myself for over 5 years, I do not get close anyone...

I have the bottom case back in a QL, which needs some attention.


Regards,

Derek
HAOUI
Bent Pin Expansion Port
Posts: 89
Joined: Tue Dec 14, 2010 2:17 pm

Re: Bottom case

Postby HAOUI » Thu Dec 24, 2020 3:11 pm

Hi Derek,
Happy to hear you are okay.
Thank you for your appreciated proposal about bottom case, but finally I could find another arrangement easier for me, so please keep it for next time ;)
BTW, I am now looking for one or two zx8301 (CLA 2310 OR CLA2345) in good condition preferably new.
Currently they aren't available on Smr.
Someone mentioned to me a seller on ebay supplying some brand new zx8301 CLA2345 for Sinclair spectrum :shock:
If available here, I will pay for it or exchange against zx8302 or 8049 I may have in drawers.
Alain



Who is online

Users browsing this forum: No registered users and 0 guests