Issue 8 discussions...

Nagging hardware related question? Post here!
User avatar
Dave
SandySuperQDave
Posts: 2444
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: Issue 8 discussions...

Postby Dave » Wed Dec 11, 2019 10:58 pm

I can wire patch that on the prototype boards under the CPU. On 4M_V5 U8 pin 36 is tied to GND. I don't know why, but the V5 layout is disconnected from the schematic, so I'll spend a bit of time trying to reconnect it so I can just import the change.

Keep everything proper.

I'll take this to email.


User avatar
Dave
SandySuperQDave
Posts: 2444
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: Issue 8 discussions...

Postby Dave » Tue Jan 07, 2020 10:36 pm

I've been doing a bit of work on this. Progress has been made.


Nasta
Gold Card
Posts: 342
Joined: Sun Feb 12, 2012 2:02 am
Location: Zapresic, Croatia

Re: Issue 8 discussions...

Postby Nasta » Wed Jan 08, 2020 12:24 am

Well, running late on this side cause I had to re-install the computer, which involves putting a new OS on it and then putting the old one in a virtual machine on the first one. On the plus side, this ended up with my current 27" 2k monitor being replaced by a 40" 4k TV which I'm using as a monitor now... finally enough screen space and pixels big enough for me to actually see :)
...40" is bordering on perverse, and that's coming from nearly a lifetime working with CAD packages, where there is no monitor large enough and there is no resolution that can be too much :)


User avatar
Dave
SandySuperQDave
Posts: 2444
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: Issue 8 discussions...

Postby Dave » Wed Jan 08, 2020 2:32 am

You'd have a cow if you had my two 43" 4K screens!

There isn't an immediate rush. Once these clean-ups are done, it'll take a couple of weeks to get and assemble the boards, and another week for one to reach you.



Who is online

Users browsing this forum: Google [Bot] and 3 guests