qubata 3.10

Helpful tips and guides, also new users can ask for help here.
nikosdoykas
ROM Dongle
Posts: 3
Joined: Tue Oct 09, 2018 4:20 am

qubata 3.10

Postby nikosdoykas » Sat Nov 10, 2018 11:45 pm

hello how i format a brand new cf card(32mb) on cf-ide adaptor on qubide with qubata 3.10?
the qubide see the cf card like unwone
Attachments
105_0023.JPG
105_0022.JPG
105_0021.JPG


User avatar
dex
Trump Card
Posts: 192
Joined: Thu Dec 23, 2010 1:40 pm

Re: qubata 3.10

Postby dex » Sun Nov 11, 2018 12:06 am

You must set unlock bit to unlock write protection.
WIN_FORMAT 1
Read the manual.
[url]cats-chess.narod.ru/QL/DOCS/QubATA_TDI.pdf[/url]


Derek_Stewart
QL Wafer Drive
Posts: 1119
Joined: Mon Dec 20, 2010 11:40 am
Location: Runcorn, Cheshire, UK

Re: qubata 3.10

Postby Derek_Stewart » Sun Nov 11, 2018 7:29 pm

Hi,

Assuming the CF Card adpter is setup correctly as a master IDE device try:

Win_format 1
Win_disk initialize,1
Win_disk create, 1,1,sizeinmega
Win_drive 1,1,1
Format win1_name

Where name is the name of the partition.

There are some good examples of how to create WIN partitions in the manual at page 13 & 15


Regards,

Derek
nikosdoykas
ROM Dongle
Posts: 3
Joined: Tue Oct 09, 2018 4:20 am

Re: qubata 3.10

Postby nikosdoykas » Mon Nov 12, 2018 8:07 pm

second command not found


Derek_Stewart
QL Wafer Drive
Posts: 1119
Joined: Mon Dec 20, 2010 11:40 am
Location: Runcorn, Cheshire, UK

Re: qubata 3.10

Postby Derek_Stewart » Mon Nov 12, 2018 10:43 pm

Hi,

Sorry for the error, thd second command should be:

WIN_DISK "init", 1

I was quoting someone else and not the manual.


Regards,

Derek
nikosdoykas
ROM Dongle
Posts: 3
Joined: Tue Oct 09, 2018 4:20 am

Re: qubata 3.10

Postby nikosdoykas » Mon Nov 12, 2018 11:12 pm

LETS TRY THEN

Μου αρέσει!
NOT FOUND .......
MAYBE INCOCAPABILITY OF CF... OR PROBLEM WITH THE CF_IDE CARD



Return to “Help for New Users”

Who is online

Users browsing this forum: No registered users and 0 guests