Re: Today I Received...
Posted: Wed Feb 05, 2020 5:55 pm
Not sure if this page helps http://www.fruitcake.plus.com/Sinclair/ ... ableQL.htm
Thanks, that shows a change in wiring from mine. That diagram shows five resistors, whereas on the one they supplied me only 4 resistors, there is no resistor between the orange cable and pin 16.fatbob_gb wrote:Retro Computer Shack only operate between Thursday 2pm and Sunday 5pm - the wiring for the QL Scart cable is shown here https://www.retrocomputershack.com/SCAR ... index.html
Pretty much doesn't matter which one, as long as it's above 0.4V. This only signals that the TV should switch to RGB mode. I have the cable from RCS, too, and as far as I know it's fine.dilwyn wrote:Although I might add that it looks like the wiring of the Retro Computer Shack QL-SCART cable is suspect, in that SCART pin 16 should go to QL pin 4 (Composite Synch) not QL pin 1 (composite PAL)
I dimly remember that they changed the cable to fix a problem with SGC, that change might be related to it. There was a thread in the forum many years ago.dilwyn wrote:Thanks, that shows a change in wiring from mine. That diagram shows five resistors, whereas on the one they supplied me only 4 resistors, there is no resistor between the orange cable and pin 16.fatbob_gb wrote:Retro Computer Shack only operate between Thursday 2pm and Sunday 5pm - the wiring for the QL Scart cable is shown here https://www.retrocomputershack.com/SCAR ... index.html
what value of resistor do you need? I have a box of the things, various values. Most are 1/4 watt and quite small - so should fit into a SCART connector. I'll send you a couple in the post. If tolerance is important I have 5% and 1%.dilwyn wrote:No shops selling components around here, so I might order another cable from them as it'd be handy to have a second lead for the other QL anyway.
Good to see you tinkering againM68008 wrote:Ammunition for some QL and Q-emuLator projects:
Yeah I reported the SGC problem to them and AFAIK they fixed the cable in later ones!mk79 wrote:I dimly remember that they changed the cable to fix a problem with SGC, that change might be related to it. There was a thread in the forum many years ago.dilwyn wrote:Thanks, that shows a change in wiring from mine. That diagram shows five resistors, whereas on the one they supplied me only 4 resistors, there is no resistor between the orange cable and pin 16.fatbob_gb wrote:Retro Computer Shack only operate between Thursday 2pm and Sunday 5pm - the wiring for the QL Scart cable is shown here https://www.retrocomputershack.com/SCAR ... index.html
Yes, the mod is indicated on the label on the cable when it arrived. Do you happen to remember what the specific issue was when a Super Gold Card was plugged in?XorA wrote:Yeah I reported the SGC problem to them and AFAIK they fixed the cable in later ones!mk79 wrote:I dimly remember that they changed the cable to fix a problem with SGC, that change might be related to it. There was a thread in the forum many years ago.dilwyn wrote: Thanks, that shows a change in wiring from mine. That diagram shows five resistors, whereas on the one they supplied me only 4 resistors, there is no resistor between the orange cable and pin 16.