SBASIC / SuperBASIC Reference Manual Online

[NormanDunbar]

Morning All,

does anyone know of a command 'JOB%' and which toolkit it might be in? It is cross referenced from the JOBID command (https://superbasic-manual.readthedocs.i ... jobid.html) and I'd like to either remove the link or add the command.

Also, there's a toolkit called Beuletools. It seems to have a lot of commands for setting up Epson (?) printers and one of the commands much cross referenced is ESC. Unfortunately, ESC is not mentioned anywhere. Does anyone have details of this command that you can send me, I'll do the necessary - and attempt to fix all the cross-references.

There may be more, but these are the ones I know about at present.


Cheers,
Norm.

PS. I fixed a few other problems this AM, and there's been a successful build.

[RWAP]

Also, there's a toolkit called Beuletools. It seems to have a lot of commands for setting up Epson (?) printers and one of the commands much cross referenced is ESC. Unfortunately, ESC is not mentioned anywhere. Does anyone have details of this command that you can send me, I'll do the necessary - and attempt to fix all the cross-references.

If you look at the toolkits I uploaded a few posts back, there is a German Beuletools_doc in there.

ESC is a function which returnss CHR$(27)
There are others such as FF (returns CHR$(12) ) etc to make it easier to write Epson control codes.

[NormanDunbar]

Thanks Rich,

I've fixed it. There will be a build later when I do some more stuff.


Cheers,
Norm.

[pjw]

does anyone know of a command 'JOB%' and which toolkit it might be in? It is cross referenced from the JOBID command

My guess is its just a typo for JOB$

[NormanDunbar]

Thanks Per, that's good enough.

Fixed and building/built.


Cheers,
Norm.