Page 2 of 2
Re: UNZIP problem
Posted: Tue Feb 12, 2019 10:21 pm
by NormanDunbar
If you EX ram1_unzip without parameters it should print some help?
Cheers,
Norm.
Re: UNZIP problem
Posted: Sun Feb 17, 2019 6:29 pm
by JihemB
Hi.
To be precise I use "Unzip 5.32", dowloaded from Dilwyn website (the version with a BASIC loader since I can't run the unzip541xq.bin version).
I have help displayed if I only enter ew ram1_unzip but the screen scrolls so I can read all the help (how to scroll lock the screen ?).
Moreover since I use a CRT screen with SCART connexion, I miss some characters on the left side of the screen.
==============================
Whatever I put the "-d flp2_" (or "-d ram2_" for instance) option before or after the ZIP file to be extracted, even if I remove the space character ("-dflp2_" ) I always get the same result :
Code: Select all
cannot create extraction directory : flp2_
I confirm "flp2_" exists and is ready to be writter (same if I use RAM2_).
Can also be tested by using a pair of commands such as
DATA_USE ram1_ : EW ram1_unzip;"flp1_program_zip"
Yes, this works better !
I used exactly the following command :
Code: Select all
DATA_USE FLP2_ : EW RAM1_unzip;"flp1_archivers_zip"
.., and YES I had the files unzipped to flp2_ !!
So what's wrong with the "-d" option ?
Re: UNZIP problem
Posted: Sun Feb 17, 2019 8:47 pm
by Derek_Stewart
Hi,
The unzip programme allows a channel id to be inserted in the command line.
For example:
EX unzip,#1
Will send the standard output to QL screen channel 1. In the above would show the UNZIP help screen to Channel #1.
Or open a channel to a file and send the UNZIP help screen to the file, to read the help options.