Miracle Systems Gold Card

Nagging hardware related question? Post here!
Retro-Mania
ROM Dongle
Posts: 28
Joined: Tue Oct 22, 2019 8:18 am

Miracle Systems Gold Card

Post by Retro-Mania »

Hi All

I am new to the forum and would like to say Hello! Also, I have a question about the Miracle Systems Gold Card and wondered if anyone may be able to help please?

I have purchased a Gold Card but am curious about a piece of wire that I have not seen on other Gold Card images online. I have attached a pic - take a look at the heatsink and just beyond it you will see a short length of blue wire attached to the outer pins of a chip. Should this wire be there? Or is it a bodged repair job do you think?

Would appreciate any comments if anyone knows anything about this please.

Thanks and Regards
Retro-Mania
Attachments
QL Gold Card.jpg


User avatar
mk79
QL Wafer Drive
Posts: 1349
Joined: Sun Feb 02, 2014 10:54 am
Location: Esslingen/Germany
Contact:

Miracle Systems Gold Card

Post by mk79 »

The QL (or maybe Aurora card) it was used with was changed to 5V operation, so the 5V regulator is bypassed here. Putting this card into a normal QL will destroy it if the wire is not removed!

Marcel


User avatar
tofro
Font of All Knowledge
Posts: 2685
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: Miracle Systems Gold Card

Post by tofro »

Hard to tell from the picture, but this looks suspiciously like a bridge between the 9V and 5V power rail (input and output of the 5V regulator seem to be bridged)

People who built their QLs into PC cases often did this "back in the days" to supply expansion cards with 5V from the PC PSU instead of generating 5V on the cards themselves like in a standard QL.

Don't plug that card into a non-modified QL

You might destroy both the card and the QL!

First take some precautions. There should be no visible/measurable connection between the 5V and 9V supply lines on the expansion connector. From what I can see, you should be fine with simply removing the wire.

Tobias


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
Retro-Mania
ROM Dongle
Posts: 28
Joined: Tue Oct 22, 2019 8:18 am

Re: Miracle Systems Gold Card

Post by Retro-Mania »

mk79 wrote:The QL (or maybe Aurora card) it was used with was changed to 5V operation, so the 5V regulator is bypassed here. Putting this card into a normal QL will destroy it if the wire is not removed!

Marcel
Thanks for the warning Marcel! I thought it looked "non-standard"!


Retro-Mania
ROM Dongle
Posts: 28
Joined: Tue Oct 22, 2019 8:18 am

Re: Miracle Systems Gold Card

Post by Retro-Mania »

tofro wrote:Hard to tell from the picture, but this looks suspiciously like a bridge between the 9V and 5V power rail (input and output of the 5V regulator seem to be bridged)

People who built their QLs into PC cases often did this "back in the days" to supply expansion cards with 5V from the PC PSU instead of generating 5V on the cards themselves like in a standard QL.

Don't plug that card into a non-modified QL

You might destroy both the card and the QL!

First take some precautions. There should be no visible/measurable connection between the 5V and 9V supply lines on the expansion connector. From what I can see, you should be fine with simply removing the wire.

Tobias
Thanks for your advice Tobias! So glad I checked here first!


Derek_Stewart
Font of All Knowledge
Posts: 3928
Joined: Mon Dec 20, 2010 11:40 am
Location: Sunny Runcorn, Cheshire, UK

Re: Miracle Systems Gold Card

Post by Derek_Stewart »

Hi,

The mod was probably for use in a QPLANE or MPLANE, which allowed more expansions to be added to the QL. Like the Auroa, Qubide etc...

But the 9v bus of the exansion which feeds into the voltage regulator, has 5v on a Qplane or Mplane system.

I have only seen 1 QL with an Aurora connected directly to the expansion port.


Regards,

Derek
Retro-Mania
ROM Dongle
Posts: 28
Joined: Tue Oct 22, 2019 8:18 am

Re: Miracle Systems Gold Card

Post by Retro-Mania »

Derek_Stewart wrote:Hi,

The mod was probably for use in a QPLANE or MPLANE, which allowed more expansions to be added to the QL. Like the Auroa, Qubide etc...

But the 9v bus of the exansion which feeds into the voltage regulator, has 5v on a Qplane or Mplane system.

I have only seen 1 QL with an Aurora connected directly to the expansion port.
Thanks Derek


Retro-Mania
ROM Dongle
Posts: 28
Joined: Tue Oct 22, 2019 8:18 am

Re: Miracle Systems Gold Card

Post by Retro-Mania »

This just gets better - I have now received the Gold Card in the post (only bought it at the weekend) and having had a look at it in the flesh, there is another, presumably "rogue" wire on the back of the card (no photos of the back of the card were provided at time of purchase). This is a similar length wire to the blue one I mentioned in my original post and connects two solder points on the rear of the PCB. I take it this is also part of the weird modification that has been carried out by the previous owner - can anyone confirm if there should be a wire soldered on the back?

I am sending the card off for the wires to be professionally removed and then given a full health-check and so have packaged it up, so apologies for no photo of the back of the card.

Thanks in anticipation
Neil


User avatar
vanpeebles
Commissario Pebbli
Posts: 2815
Joined: Sat Nov 20, 2010 7:13 pm
Location: North East UK

Re: Miracle Systems Gold Card

Post by vanpeebles »

Be careful though, not all wires are bad. QL's usually have wires flying arl ower. :lol: Always best to check first :)


Retro-Mania
ROM Dongle
Posts: 28
Joined: Tue Oct 22, 2019 8:18 am

Re: Miracle Systems Gold Card

Post by Retro-Mania »

vanpeebles wrote:Be careful though, not all wires are bad. QL's usually have wires flying arl ower. :lol: Always best to check first :)
True - but this is the actual Gold Card I am talking about which looks like it was quite a nice design - bridging wires just look out of place on it. I can't find any images online of the read of the card though.


Post Reply