SBASIC / SuperBASIC Reference Manual Online

A collection of QL services and websites.
User avatar
NormanDunbar
Super Gold Card
Posts: 688
Joined: Tue Dec 14, 2010 9:04 am
Location: Leeds, West Yorkshire, UK
Contact:

Re: SBASIC / SuperBASIC Reference Manual Online

Postby NormanDunbar » Tue Dec 11, 2018 9:22 am

Morning All,

does anyone know of a command 'JOB%' and which toolkit it might be in? It is cross referenced from the JOBID command (https://superbasic-manual.readthedocs.i ... jobid.html) and I'd like to either remove the link or add the command.

Also, there's a toolkit called Beuletools. It seems to have a lot of commands for setting up Epson (?) printers and one of the commands much cross referenced is ESC. Unfortunately, ESC is not mentioned anywhere. Does anyone have details of this command that you can send me, I'll do the necessary - and attempt to fix all the cross-references.

There may be more, but these are the ones I know about at present.


Cheers,
Norm.

PS. I fixed a few other problems this AM, and there's been a successful build.


Why do they put lightning conductors on churches?
If at first you don't succeed, don't take up skydiving!
If you think your job is pointless, remember, there's someone in Germany who fits indicators to BMWs.
RWAP
RWAP Master
Posts: 2586
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

Re: SBASIC / SuperBASIC Reference Manual Online

Postby RWAP » Tue Dec 11, 2018 10:29 am

NormanDunbar wrote:Also, there's a toolkit called Beuletools. It seems to have a lot of commands for setting up Epson (?) printers and one of the commands much cross referenced is ESC. Unfortunately, ESC is not mentioned anywhere. Does anyone have details of this command that you can send me, I'll do the necessary - and attempt to fix all the cross-references.


If you look at the toolkits I uploaded a few posts back, there is a German Beuletools_doc in there.

ESC is a function which returnss CHR$(27)
There are others such as FF (returns CHR$(12) ) etc to make it easier to write Epson control codes.


User avatar
NormanDunbar
Super Gold Card
Posts: 688
Joined: Tue Dec 14, 2010 9:04 am
Location: Leeds, West Yorkshire, UK
Contact:

Re: SBASIC / SuperBASIC Reference Manual Online

Postby NormanDunbar » Tue Dec 11, 2018 10:55 am

Thanks Rich,

I've fixed it. There will be a build later when I do some more stuff.


Cheers,
Norm.


Why do they put lightning conductors on churches?
If at first you don't succeed, don't take up skydiving!
If you think your job is pointless, remember, there's someone in Germany who fits indicators to BMWs.
User avatar
pjw
Gold Card
Posts: 497
Joined: Fri Jul 11, 2014 8:44 am
Location: Norway
Contact:

Re: SBASIC / SuperBASIC Reference Manual Online

Postby pjw » Tue Dec 11, 2018 11:26 am

NormanDunbar wrote:does anyone know of a command 'JOB%' and which toolkit it might be in? It is cross referenced from the JOBID command

My guess is its just a typo for JOB$


Per
Be wary of large West-Coast corporations bearing gifts!
- Ancient Trojan proverb
User avatar
NormanDunbar
Super Gold Card
Posts: 688
Joined: Tue Dec 14, 2010 9:04 am
Location: Leeds, West Yorkshire, UK
Contact:

Re: SBASIC / SuperBASIC Reference Manual Online

Postby NormanDunbar » Tue Dec 11, 2018 12:59 pm

Thanks Per, that's good enough.

Fixed and building/built.


Cheers,
Norm.


Why do they put lightning conductors on churches?
If at first you don't succeed, don't take up skydiving!
If you think your job is pointless, remember, there's someone in Germany who fits indicators to BMWs.

Who is online

Users browsing this forum: No registered users and 0 guests