Thanks.
Cheers,
Norm.
Issue 6 board updates
- NormanDunbar
- Forum Moderator
- Posts: 1303
- Joined: Tue Dec 14, 2010 9:04 am
- Location: Leeds, West Yorkshire, UK
- Contact:
Re: Issue 6 board updates
Why do they put lightning conductors on churches?
Author of Arduino Software Internals - https://www.amazon.co.uk/Arduino-Softwa ... 1484257898, https://www.apress.com/gb/book/9781484257890
Author of Arduino Software Internals - https://www.amazon.co.uk/Arduino-Softwa ... 1484257898, https://www.apress.com/gb/book/9781484257890
Re: Issue 6 board updates
Beautiful! I'd like to hang one on my walltetroid wrote:I made several Issue 6 PCB clones.

Well, serial on German PCs is standard DB9 and net connectors are basically standard 3,5mm jacks, just the power connector is really special.I think not really to make the assembly this board, because of very rare original parts, such as the special serial, power, net connectors.
Cheers, Marcel
Re: Issue 6 board updates
mk79 wrote:Well, serial on German PCs is standard DB9 and net connectors are basically standard 3,5mm jacks, just the power connector is really special.
PCs? I hope the many years of emulation did not make your subconsciousness exchange them with QLs

tetroid wrote:I made several Issue 6 PCB clones.
Amazing work!
Re: Issue 6 board updates
If I remember correctly it says "Personal Computer" on the back of the QL casePeter wrote:mk79 wrote:Well, serial on German PCs is standard DB9 and net connectors are basically standard 3,5mm jacks, just the power connector is really special.
PCs? I hope the many years of emulation did not make your subconsciousness exchange them with QLs![]()

Marcel
Re: Issue 6 board updates
Just PCBs or have you ever used the assembly service, too?tetroid wrote:Made in Chna.
Shenzhen Xindingtuo Electronics Co.
Re: Issue 6 board updates
mk79 wrote:Just PCBs or have you ever used the assembly service, too?tetroid wrote:Made in Chna.
Shenzhen Xindingtuo Electronics Co.
No, assembly service in Russia.
- vanpeebles
- Commissario Pebbli
- Posts: 2524
- Joined: Sat Nov 20, 2010 7:13 pm
- Location: North East UK
Re: Issue 6 board updates
tetroid wrote:I made several Issue 6 PCB clones.
For historical preservation.
Hi, great work, did you also think of making Issue 5 PCBs?
I own ISS6 QL, but I have always wondered which ISS is valued more?
In the film making industry, sequals are rarely found as good to the original story. In u-electronics might be different. ISS6 was meant as the next best thing consolidating all improvements, but I think there were some reworks and other later revisions?
Cheers
Tomas
Who is online
Users browsing this forum: No registered users and 7 guests