Issue 6 board updates
- NormanDunbar
- Forum Moderator
- Posts: 2276
- Joined: Tue Dec 14, 2010 9:04 am
- Location: Leeds, West Yorkshire, UK
- Contact:
Re: Issue 6 board updates
Thanks.
Cheers,
Norm.
Cheers,
Norm.
Why do they put lightning conductors on churches?
Author of Arduino Software Internals
Author of Arduino Interrupts
No longer on Twitter, find me on https://mastodon.scot/@NormanDunbar.
Author of Arduino Software Internals
Author of Arduino Interrupts
No longer on Twitter, find me on https://mastodon.scot/@NormanDunbar.
- mk79
- QL Wafer Drive
- Posts: 1349
- Joined: Sun Feb 02, 2014 10:54 am
- Location: Esslingen/Germany
- Contact:
Re: Issue 6 board updates
Beautiful! I'd like to hang one on my walltetroid wrote:I made several Issue 6 PCB clones.
Well, serial on German PCs is standard DB9 and net connectors are basically standard 3,5mm jacks, just the power connector is really special.I think not really to make the assembly this board, because of very rare original parts, such as the special serial, power, net connectors.
Cheers, Marcel
Re: Issue 6 board updates
PCs? I hope the many years of emulation did not make your subconsciousness exchange them with QLsmk79 wrote:Well, serial on German PCs is standard DB9 and net connectors are basically standard 3,5mm jacks, just the power connector is really special.
Amazing work!tetroid wrote:I made several Issue 6 PCB clones.
- mk79
- QL Wafer Drive
- Posts: 1349
- Joined: Sun Feb 02, 2014 10:54 am
- Location: Esslingen/Germany
- Contact:
Re: Issue 6 board updates
If I remember correctly it says "Personal Computer" on the back of the QL casePeter wrote:PCs? I hope the many years of emulation did not make your subconsciousness exchange them with QLsmk79 wrote:Well, serial on German PCs is standard DB9 and net connectors are basically standard 3,5mm jacks, just the power connector is really special.
Marcel
- mk79
- QL Wafer Drive
- Posts: 1349
- Joined: Sun Feb 02, 2014 10:54 am
- Location: Esslingen/Germany
- Contact:
Re: Issue 6 board updates
Just PCBs or have you ever used the assembly service, too?tetroid wrote:Made in Chna.
Shenzhen Xindingtuo Electronics Co.
Re: Issue 6 board updates
No, assembly service in Russia.mk79 wrote:Just PCBs or have you ever used the assembly service, too?tetroid wrote:Made in Chna.
Shenzhen Xindingtuo Electronics Co.
I still have my QL items still available, anyone interested, please contact me at tetroid@inbox.ru
- vanpeebles
- Commissario Pebbli
- Posts: 2821
- Joined: Sat Nov 20, 2010 7:13 pm
- Location: North East UK
Re: Issue 6 board updates
Hi, great work, did you also think of making Issue 5 PCBs?tetroid wrote: I made several Issue 6 PCB clones.
For historical preservation.
I own ISS6 QL, but I have always wondered which ISS is valued more?
In the film making industry, sequals are rarely found as good to the original story. In u-electronics might be different. ISS6 was meant as the next best thing consolidating all improvements, but I think there were some reworks and other later revisions?
Cheers
Tomas
Re: Issue 6 board updates
RED ISSUE 6 assembled board.
I still have my QL items still available, anyone interested, please contact me at tetroid@inbox.ru
Re: Issue 6 board updates
And something else :
I still have my QL items still available, anyone interested, please contact me at tetroid@inbox.ru