Yes it was the Habi Image Editor - but it was apparent that there is no checking - I couldn't find the manual and it was not exactly the most obvious bit of software to use. I used one of the options and it appears destroyed the QL formatted CF card. Oh well.Derek_Stewart wrote:Hi Rich,
What PC utility are you using? the Habi Image Editor....
I have used that to import data onto a CF Disk for use in the Tetroid Trump Card. All works okay for me.
With regards to Alain's Qubide drivers they work perfectly with the Tetroid hardware. But I have refer to the manual to remind myself of the WIN_ commands.
QubIDE 3.10
-
- RWAP Master
- Posts: 2842
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: QubIDE 3.10
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
-
- Font of All Knowledge
- Posts: 4013
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: QubIDE 3.10
Hi Rich,
Did you look at the tutorial web pages.
The only problem I had was the QDOS header issue. So I only transfer ZIP files.
I connect the CF Card via USB CF Card Reader, using Windows 10, I have used the Image Editor on Windows 7, XP, all seems to work OK for me.
Did you look at the tutorial web pages.
The only problem I had was the QDOS header issue. So I only transfer ZIP files.
I connect the CF Card via USB CF Card Reader, using Windows 10, I have used the Image Editor on Windows 7, XP, all seems to work OK for me.
Regards,
Derek
Derek
-
- RWAP Master
- Posts: 2842
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: QubIDE 3.10
OK I admit I didn't read the manualDerek_Stewart wrote:Hi Rich,
Did you look at the tutorial web pages.
The only problem I had was the QDOS header issue. So I only transfer ZIP files.
I connect the CF Card via USB CF Card Reader, using Windows 10, I have used the Image Editor on Windows 7, XP, all seems to work OK for me.
It does apparently extract files complete with the QDOS header, so maybe you need to re-read the manual too if you can't get it to work (someone on Facebook recently managed to do it)
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
-
- RWAP Master
- Posts: 2842
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: QubIDE 3.10
OK that worked - although there was a typo in the above - it needed to read:HAOUI wrote:
Win_format 1
Win_disk initialize,1
Win_disk create, 1,sizeinmega
Win_drive 1,1,1
Format win1_name
Code: Select all
Win_format 1
Win_disk initialize,1
Win_disk create, 1,1,sizeinmega
Win_drive 1,1,1
Format win1_name
I had to use win_disk create,1,1,7
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: QubIDE 3.10
Hi Rich,
Sorry for the typo in the command win_disk you. You are right.
About size, some makers compute mega and giga as 1000 and others as 1024. Win_disk expect size in megabytes as 1=1024*1024 bytes.
To know real size of cf card, use
Win_disk detail,1
This will show you geometry as CHS and you can calculate the right size from this as :
(CxHxSx512)/1024/1024=size in mega
Regards,
Sorry for the typo in the command win_disk you. You are right.
About size, some makers compute mega and giga as 1000 and others as 1024. Win_disk expect size in megabytes as 1=1024*1024 bytes.
To know real size of cf card, use
Win_disk detail,1
This will show you geometry as CHS and you can calculate the right size from this as :
(CxHxSx512)/1024/1024=size in mega
Regards,