QubIDE 3.10

Nagging hardware related question? Post here!
RWAP
RWAP Master
Posts: 2643
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

Re: QubIDE 3.10

Postby RWAP » Tue May 01, 2018 9:58 pm

Derek_Stewart wrote:Hi Rich,

What PC utility are you using? the Habi Image Editor....

I have used that to import data onto a CF Disk for use in the Tetroid Trump Card. All works okay for me.

With regards to Alain's Qubide drivers they work perfectly with the Tetroid hardware. But I have refer to the manual to remind myself of the WIN_ commands.


Yes it was the Habi Image Editor - but it was apparent that there is no checking - I couldn't find the manual and it was not exactly the most obvious bit of software to use. I used one of the options and it appears destroyed the QL formatted CF card. Oh well.


Derek_Stewart
QL Wafer Drive
Posts: 1464
Joined: Mon Dec 20, 2010 11:40 am
Location: Runcorn, Cheshire, UK

Re: QubIDE 3.10

Postby Derek_Stewart » Wed May 02, 2018 9:57 am

Hi Rich,

Did you look at the tutorial web pages.

The only problem I had was the QDOS header issue. So I only transfer ZIP files.

I connect the CF Card via USB CF Card Reader, using Windows 10, I have used the Image Editor on Windows 7, XP, all seems to work OK for me.


Regards,

Derek
RWAP
RWAP Master
Posts: 2643
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

Re: QubIDE 3.10

Postby RWAP » Wed May 02, 2018 10:06 am

Derek_Stewart wrote:Hi Rich,

Did you look at the tutorial web pages.

The only problem I had was the QDOS header issue. So I only transfer ZIP files.

I connect the CF Card via USB CF Card Reader, using Windows 10, I have used the Image Editor on Windows 7, XP, all seems to work OK for me.


OK I admit I didn't read the manual :o

It does apparently extract files complete with the QDOS header, so maybe you need to re-read the manual too if you can't get it to work (someone on Facebook recently managed to do it)


RWAP
RWAP Master
Posts: 2643
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

Re: QubIDE 3.10

Postby RWAP » Fri May 04, 2018 12:12 pm

HAOUI wrote:
Win_format 1
Win_disk initialize,1
Win_disk create, 1,sizeinmega
Win_drive 1,1,1
Format win1_name


OK that worked - although there was a typo in the above - it needed to read:

Code: Select all

Win_format 1
Win_disk initialize,1
Win_disk create, 1,1,sizeinmega
Win_drive 1,1,1
Format win1_name


Just a small comment - I had 2 8GB cards, but win_disk create,1,1,8 both failed with disk full.
I had to use win_disk create,1,1,7

:(


HAOUI
ROM Dongle
Posts: 33
Joined: Tue Dec 14, 2010 2:17 pm

Re: QubIDE 3.10

Postby HAOUI » Fri May 04, 2018 5:48 pm

Hi Rich,
Sorry for the typo in the command win_disk you. You are right.

About size, some makers compute mega and giga as 1000 and others as 1024. Win_disk expect size in megabytes as 1=1024*1024 bytes.
To know real size of cf card, use
Win_disk detail,1
This will show you geometry as CHS and you can calculate the right size from this as :
(CxHxSx512)/1024/1024=size in mega

Regards,



Who is online

Users browsing this forum: No registered users and 7 guests