Page 1 of 1

Bottom case

Posted: Thu Dec 10, 2020 10:12 am
by HAOUI
Hi all,
I am looking for a bottom case of a BBQL (only the base case, empty) in order to rebuild mine.
If anyone has a broken machine, I'd delighted to buy this part and pay all fees (to be sent to Paris).
Regards,
Alain

Re: Bottom case

Posted: Sat Dec 12, 2020 9:38 am
by Derek_Stewart
Hi Alain,

I have QL spares parts including cases, I can supply you a bottom case, send me a PM if you are interested

I have just been in hospital having a Throat Operation,so am on a little voice rest and recovery from the anesthetic.

Also there is another dead line, the UK comes to the end of the Brexit Transition period, is ending on 31/12/20. If no trade deal then EU import tax will be applied to all UK imports. What mess these so called politicians have made of this, 4 years to say no... typical upper class conservative idiots.

Re: Bottom case

Posted: Sat Dec 12, 2020 10:09 am
by NormanDunbar
Get well soon Derek.

As for brexit ......... the public were sold lie after lie after lie, by both sides. The Tories have fscked it all up. Oven ready deal anyone?

Urgh! Too early for politics, sorry.

Cheers,
Norm.

Re: Bottom case

Posted: Sat Dec 12, 2020 12:21 pm
by Cristian
Derek_Stewart wrote: I have just been in hospital having a Throat Operation
Get well soon & stay safe Derek!

Re: Bottom case

Posted: Sun Dec 13, 2020 5:28 pm
by HAOUI
Derek_Stewart wrote:Hi Alain,

I have QL spares parts including cases, I can supply you a bottom case, send me a PM if you are interested

I have just been in hospital having a Throat Operation,so am on a little voice rest and recovery from the anesthetic.

Also there is another dead line, the UK comes to the end of the Brexit Transition period, is ending on 31/12/20. If no trade deal then EU import tax will be applied to all UK imports. What mess these so called politicians have made of this, 4 years to say no... typical upper class conservative idiots.
Thank you Derek for your proposal.
I well reciept your mail and answred it.
All my wishes for a good recovery.
Alain

Re: Bottom case

Posted: Wed Dec 23, 2020 8:18 pm
by Derek_Stewart
HAOUI wrote:
Derek_Stewart wrote:Hi Alain,

I have QL spares parts including cases, I can supply you a bottom case, send me a PM if you are interested

I have just been in hospital having a Throat Operation,so am on a little voice rest and recovery from the anesthetic.

Also there is another dead line, the UK comes to the end of the Brexit Transition period, is ending on 31/12/20. If no trade deal then EU import tax will be applied to all UK imports. What mess these so called politicians have made of this, 4 years to say no... typical upper class conservative idiots.
Thank you Derek for your proposal.
I well reciept your mail and answred it.
All my wishes for a good recovery.
Alain
Hi Alain,

I am okay, where I live is not too much of risk compared to the rest of UK. But I have been docially distantancing myself for over 5 years, I do not get close anyone...

I have the bottom case back in a QL, which needs some attention.

Re: Bottom case

Posted: Thu Dec 24, 2020 3:11 pm
by HAOUI
Hi Derek,
Happy to hear you are okay.
Thank you for your appreciated proposal about bottom case, but finally I could find another arrangement easier for me, so please keep it for next time ;)
BTW, I am now looking for one or two zx8301 (CLA 2310 OR CLA2345) in good condition preferably new.
Currently they aren't available on Smr.
Someone mentioned to me a seller on ebay supplying some brand new zx8301 CLA2345 for Sinclair spectrum :shock:
If available here, I will pay for it or exchange against zx8302 or 8049 I may have in drawers.
Alain

Re: Bottom case

Posted: Fri Mar 19, 2021 12:59 pm
by mselkin
Derek_Stewart,
Do you still have QL case parts? I'm looking for a top piece (don't need keys).

Re: Bottom case

Posted: Fri Mar 19, 2021 10:05 pm
by Derek_Stewart
mselkin wrote:Derek_Stewart,
Do you still have QL case parts? I'm looking for a top piece (don't need keys).
Hi,

Yes I have QL parts, I can supply you with a Top case.

I have sent you a PM

Re: Bottom case

Posted: Fri Mar 19, 2021 11:23 pm
by mselkin
Derek, I am very interested and received your PM but as I am a new user, the system will not allow me to PM you. Can you please advise how I can communicate?