Jack_Free wrote:I'm a beginner, I ask stupidly how do I run the program?
There is no qlc_boot
Where can I find some DOC file editing program?
Why is not someone in the archive?
Is the QD2018 link in the qlcconfig_bas file what?
First of all please download the manual and read it
In order to run QLCommander your computer must have Toolkit 2 (I assume you have it in ROM) and you must install the following extensions:
1. QPTR (also needed by previous version, so I assume you have it)
2. qlc_code (also needed by previous version, so I assume you have it)
3. Turbo Toolkit (if you don't have it yet then download it from Dilwyn's site
http://www.dilwyn.me.uk/turbo/trbot14.zip and then LRESPR turbo_tk_code
Turbo Toolkit manual is here:
http://www.dilwyn.me.uk/turbo/trbom16.zip
The above extensions must be loaded only once per session, so it is a good idea to create a boot file for loading them when QL starts
To use the editor you need to have an editor installed on your system, and you have to configure it in qlcconfig_bas
As I wrote in the manual I tested it with QD and QED.
I prefer to use QD, as it is more user friendly. You can download QD from Dilwyn's site:
http://www.dilwyn.me.uk/editview/qd2018.zip
QD manual is here:
http://www.dilwyn.me.uk/editview/QD2018_manual.pdf
After you download it follow the instructions to install it.
QD also needs Pointer Environment to run - you can download it here:
http://www.dilwyn.me.uk/pe/index.html
On my QL I am using ptr_gen 201, wman 205 and hot_rext 229 (newer versions gave me some trouble - but on your system they might work)
Also you must install XChange (I presume everybody has it installed). If you do not have it then download it from:
http://www.dilwyn.me.uk/psions/xchange.zip
XChange manuals:
http://www.dilwyn.me.uk/psions/xchdoc.zip
Jack_Free wrote:I installed components as well as the old version of Qlcommander and then used LRESPR qlc_exe.
The program writes not implemented yet on a white screen.
That's because you should EXECute it, not LRESPR it !
Please see manual - INSTALL - point 8:
8. Run QLC using the command (modify the drive and directory name to those in your setup):
EX win1_QLCOMMANDER_qlc_obj; win1_QLCOMMANDER_
OR
EX win1_QLCOMMANDER_qlc_exe; win1_QLCOMMANDER_
You should only run one of them, it does not matter which
qlc_exe – is QLC executable compiled with Turbo
qlc_obj – is QLC executable compiled with Qliberator (with runtime inclued)
I hope this will help you to install the editor and QLCommander