30th birthday of QL
30th birthday of QL
The new QL-SD Device is now for sale.
A first auction can be found on SMR
http://www.sellmyretro.com/offer/detail ... or-QL-3596
it will end on 21.1.2014 as this is the QL's birthday.
Kind regards
Paul
A first auction can be found on SMR
http://www.sellmyretro.com/offer/detail ... or-QL-3596
it will end on 21.1.2014 as this is the QL's birthday.
Kind regards
Paul
Last edited by Paul on Fri Jan 10, 2014 10:18 am, edited 1 time in total.
Re: 30th birthday of QL on 21.1.2014
Great auction!
Sadly, SellMyRetro reports "You cannot Bid! This item is not for sale in your region."
Sadly, SellMyRetro reports "You cannot Bid! This item is not for sale in your region."
-
- RWAP Master
- Posts: 2839
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: 30th birthday of QL on 21.1.2014
I have reported that to Paul - he needs to adding shipping options for outside the EU if he is willing to send it further overseas....
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: 30th birthday of QL on 21.1.2014
Bid placed
Any bets on what it'll go for? I am guessing if it has S/N: 1 it'll go for >£150
Any bets on what it'll go for? I am guessing if it has S/N: 1 it'll go for >£150
-
- RWAP Master
- Posts: 2839
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: 30th birthday of QL on 21.1.2014
No idea - but yes, the winner will now get a certificate signed by Peter Graf to say it is the first production model...
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: 30th birthday of QL
I have added the pre version of the manual to the auction, just in case someone is interested
- Mr_Navigator
- QL Fanatic
- Posts: 782
- Joined: Mon Dec 13, 2010 11:17 pm
- Location: UK, Essex
- Contact:
Re: 30th birthday of QL
InterestingPaul wrote:I have added the pre version of the manual to the auction, just in case someone is interested
In it it states
So this must be pre version "Bad Manual"Bad manuals would now state „Assembly follows the exact steps as disassembly but in the
opposite order“ - And we do exactly the same.
-----------------------------------------------------------------------------------
QLick here for the Back 2 the QL Blog http://backtotheql.blogspot.co.uk/
QLick here for the Back 2 the QL Blog http://backtotheql.blogspot.co.uk/
- vanpeebles
- Commissario Pebbli
- Posts: 2821
- Joined: Sat Nov 20, 2010 7:13 pm
- Location: North East UK
Re: 30th birthday of QL
I find it exciting to read on page 5 that QL-SD contained Toolkit II in (EP)ROM.vanpeebles wrote:Just had a read during my tea break, most exciting!
This would indeed be nice to have, since Toolkit II in RAM had difficulties with network timings, if I remember correctly. Unfortunately, the address space in the QL ROM socket is just 64KB and does only allow 48K for the OS plus 16K for the QL-SD driver and IO. With QL-SD installed, Toolkit II has to be loaded from some drive (e.g. floppy or SDHC card) into RAM.
QL-SD does not contain Toolkit 2!
Re: 30th birthday of QL
Oops, my fault. I have corrected this in my local version, but not sent it to Paul yet.....
(That's why it says it's a "pre-version" )
Apologies,
Tobias
(That's why it says it's a "pre-version" )
Apologies,
Tobias
ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO