Dear All,
I am looking for a suitable plug to go in SER and CTL ports.
I found this on eBay, please see picture.
The latch appear on the right hand side. What do you think, would it fit QL either socket, after the latch is cut off with a knife.
Many thanks in advance
TCAT
BT Phone Plug
-
- RWAP Master
- Posts: 2839
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: BT Phone Plug
It all depends - the standard BT phone plug is too wide - however see the other thread:
http://www.qlforum.co.uk/viewtopic.php?f=2&t=530
You just missed out - I was selling a handful on sellmyretro which had been cut out of old systems - they were just with a lead on the end...
http://www.qlforum.co.uk/viewtopic.php?f=2&t=530
You just missed out - I was selling a handful on sellmyretro which had been cut out of old systems - they were just with a lead on the end...
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm