Nagging hardware related question? Post here!
Dave
SandySuperQDave
Posts: 2778 Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:
Post
by Dave » Thu Feb 28, 2013 4:53 am
I ordered the following today. Can anyone guess what I'm making?
Code: Select all
110 P1.00KFCT-ND RES 1.00K OHM 1/4W 1% 1206 SMD 0 0.028 $ 3.08
165 399-3676-1-ND CAPACITOR TANT .10UF 35V 10% SMD 0 0.1645 $27.14
220 493-1036-ND CAP 10UF 16V ELECT VR RADIAL 0 0.0884 $19.45
55 NJU7660M-ND IC DC/DC VOLTAGE CONVERTER 8-DMP 0 0.95 $52.54
110 478-1903-ND CAP TANT 4.7UF 10V 10% RADIAL 0 0.3168 $34.85
55 WM9132-ND CONN HEADER 4POS .200 VERT 0 0.6578 $36.18
400 ft magnet wire, 38 gauge
Here's a clue: built by TF Services, really useful to have
RWAP
RWAP Master
Posts: 2839 Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:
Post
by RWAP » Thu Feb 28, 2013 9:53 am
Now if it were only a ROMDisq - but looks more like a Minerva - MKII if lucky !!
vanpeebles
Commissario Pebbli
Posts: 2821 Joined: Sat Nov 20, 2010 7:13 pm
Location: North East UK
Post
by vanpeebles » Thu Feb 28, 2013 11:49 am
I was thinking more along the lines of Mechagodzilla?
dilwyn
Mr QL
Posts: 2761 Joined: Wed Dec 01, 2010 10:39 pm
Post
by dilwyn » Thu Feb 28, 2013 1:06 pm
vanpeebles wrote: I was thinking more along the lines of Mechagodzilla?
if that 400ft of magnetwire is anything to go by ...
Or if Tony's son Ben was anything to go by, Legodzilla
Dave
SandySuperQDave
Posts: 2778 Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:
Post
by Dave » Sat Mar 02, 2013 10:16 pm
Nobody's even close yet
Mr_Navigator
QL Fanatic
Posts: 782 Joined: Mon Dec 13, 2010 11:17 pm
Location: UK, Essex
Contact:
Post
by Mr_Navigator » Sun Mar 03, 2013 9:57 am
A battery/generator
dilwyn
Mr QL
Posts: 2761 Joined: Wed Dec 01, 2010 10:39 pm
Post
by dilwyn » Sun Mar 03, 2013 12:57 pm
QL power supplies for Rich or Mplanes
Dave
SandySuperQDave
Posts: 2778 Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:
Post
by Dave » Sun Mar 03, 2013 3:31 pm
MPlanes for the win!
I am completing the remaining stock of MPlane PCBs and Minerva PCBs.
dilwyn
Mr QL
Posts: 2761 Joined: Wed Dec 01, 2010 10:39 pm
Post
by dilwyn » Sun Mar 03, 2013 5:20 pm
Dave wrote: MPlanes for the win!
I am completing the remaining stock of MPlane PCBs and Minerva PCBs.
So where does the
400 ft magnet wire, 38 gauge come in?
Dave
SandySuperQDave
Posts: 2778 Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:
Post
by Dave » Sun Mar 03, 2013 6:08 pm
The Mplane was designed for Auroras and Gold Cards... It therefore omitted a track which is needed if you use an original QL board. Tony used to place this missing track by hiding the wire under the connectors, and I will be doing the same. Magnet wire is perfect - it comes with an insulating coating that protects against shorts, but that works as a flux when soldered.