Aurora Cases
Re: Aurora Cases
If I remember rightly - the Qubide card was setup to run from the last I/O location - as SGC/Aurora combo allowed only 2 addresses - ROM expansion area or that top I/O address which is unused by Aurora VRAM. The latest ROM image (QUBATA) actually copies itself into RAM, but knows where it's I/O base was located - so patches that back in - I presume it can also work from either of these 2 addresses.
- XorA
- Site Admin
- Posts: 1368
- Joined: Thu Jun 02, 2011 11:31 am
- Location: Shotts, North Lanarkshire, Scotland, UK
Re: Aurora Cases
Ahah, I shall try later, but that hint may very well have saved me dismantling itPr0f wrote:If I remember rightly - the Qubide card was setup to run from the last I/O location - as SGC/Aurora combo allowed only 2 addresses - ROM expansion area or that top I/O address which is unused by Aurora VRAM. The latest ROM image (QUBATA) actually copies itself into RAM, but knows where it's I/O base was located - so patches that back in - I presume it can also work from either of these 2 addresses.
-
- Font of All Knowledge
- Posts: 3973
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Aurora Cases
Hi,
I used to build QLs inti PC cases, usual with a Qplane or Mplane to connect the QL board with a Super Gold Card and Qubide. When the Aurora appeared the QL board got replaced by the Aurora.
But these PC cases were the standard Beige PC colour. QL Black seemed unobtainable in 1994.
The Q60 was built into a Beige Midi Tower AT Case, supplied by Maplins, which I still have 7 boxed Maplin AT PC Cases and PSUs.
I built a Mplane,SGC,Qubide,Aurora into a Black Suttle case which did fit quite well, except the Shuttle case was a little mod. to the Shuttle case.
The Q60 I have, depicted on the Forum, is fitted into a Black Shuttle case, without the dodgey Shuttle cooling system. Work fine with a small switch to turn on the ATX PSU.
I used to build QLs inti PC cases, usual with a Qplane or Mplane to connect the QL board with a Super Gold Card and Qubide. When the Aurora appeared the QL board got replaced by the Aurora.
But these PC cases were the standard Beige PC colour. QL Black seemed unobtainable in 1994.
The Q60 was built into a Beige Midi Tower AT Case, supplied by Maplins, which I still have 7 boxed Maplin AT PC Cases and PSUs.
I built a Mplane,SGC,Qubide,Aurora into a Black Suttle case which did fit quite well, except the Shuttle case was a little mod. to the Shuttle case.
The Q60 I have, depicted on the Forum, is fitted into a Black Shuttle case, without the dodgey Shuttle cooling system. Work fine with a small switch to turn on the ATX PSU.
Regards,
Derek
Derek