GermanQL and composite signal

Nagging hardware related question? Post here!
Post Reply
mhanias
Brittle Membrane
Posts: 105
Joined: Mon Jul 11, 2011 10:12 pm

GermanQL and composite signal

Post by mhanias »

Is it true that German QL's have only monochrome composite output?


User avatar
bwinkel67
QL Wafer Drive
Posts: 1185
Joined: Thu Oct 03, 2019 2:09 am

Re: GermanQL and composite signal

Post by bwinkel67 »

I don't know about the German models but the US ones only have monochrome composite out on the RGB DIN socket. Note that both US and German models also use DB-9 serial and joystick connector.

Pin 1 on the RGB socket gives a 5 volt signal and no composite color out. Now it's easy enough to fix since you can grab the color composite right form the RF modulator. I did a mod that put a switch on it and sends it out pin 3 so I can have one cable for color and monochrome composite using the same cable and just switch it (when power is off). I've not put a capacitor on it like the Spectrum mod but my color signal is quite clean, stable and clear (the green shimmers a bit).


Maskenlos
Over Heated PSU
Posts: 138
Joined: Sat Nov 03, 2018 12:14 pm

Re: GermanQL and composite signal

Post by Maskenlos »

Hi,

for my German QL this is correct. If you want to have the "color" composite you have to grab it internally.

Stephan


Post Reply