The Sinclair QL Forum

About the values for use with V2 and V3 - I think it is the same- the function the small circuit must be the same. It is not changed on the different versions.

Klaus

klausfrank wrote:About the values for use with V2 and V3 - I think it is the same- the function the small circuit must be the same. It is not changed on the different versions.

Klaus

Thank you very much Klaus! This is really helpful! Very much appreciated!

Kind Regards
Neil

I am happy to help, don’t hesitate to ask for help.

Regards
Klaus

Speaking of Gold Card
I accidently observed that the function <Alt>+<Enter> in my Gold Card had disappeared. I have a keyboard interface from JFC , but that shouldn’t be a problem, but I would like to hear if others have seen or heard of?
Any suggestions?
Regards

klausfrank wrote:Speaking of Gold Card
I accidently observed that the function <Alt>+<Enter> in my Gold Card had disappeared. I have a keyboard interface from JFC , but that shouldn’t be a problem, but I would like to hear if others have seen or heard of?
Any suggestions?
Regards

Depending on what software you're running, that might be absolutely normal - Hotkey System 2, for example, replaces/disables TK2 ALTKEY completely.
When you run your GC "naked" (i.e. no software loaded at all), is ALT+ENTER still gone? Then it might be a hardware problem.

Hi,

The JFC keyboard interface has a debounce feature on the interface, maybe this is didabling the ALT-ENTER key press.

I always found the Hotkey System II disabling ALT-ENTER as a little pity petty, but the History extension allows use of the UP/DOWN arrow to scroll through the keyboard input channel stream.

Thank you very much for your replies.
I removed everything about the Hotkey system, and the <Alt><Enter> is working again.
Again thank you.

Regards
Klaus