DIY QubIDE Parts list

Nagging hardware related question? Post here!
axeman
ROM Dongle
Posts: 8
Joined: Sat Jun 08, 2019 9:57 pm

DIY QubIDE Parts list

Postby axeman » Sun Jun 23, 2019 11:14 pm

Hi,

I'm just getting the parts together for a diy QubIDE build. Can anyone provide the parts list from the Sellmyretro QubIde kit as I've sourced the same board. I've looked on http://hardware.speccy.org/temp/qubide-i.html but the resistor array size is ambiguous as is some of the capacitor and other resistor sizes.

Thanks

Tom


User avatar
Dave
SandySuperQDave
Posts: 2411
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: DIY QubIDE Parts list

Postby Dave » Mon Jun 24, 2019 1:55 am

D1 is a BAT41
D2 is a 1N4148
Caps C3-C6 are 100nF, standard bead type
Two electrolytics by the 7805 are 10uF 2.54mm (.1") radial, 16v
RN1 is a bussed .1" SIL, 8 pin (7 resistors commoned together to the 8th pin) and provides a weak pull down. 3K3 sounds good.

3x GAL16V8 are DIP-20.
1x 74HCT688 is DIP-20
2x 74HCT646 are SOIC-24
The 512Kx8 SRAM is AS6C4008, though there are many pin compatible equivalents.


axeman
ROM Dongle
Posts: 8
Joined: Sat Jun 08, 2019 9:57 pm

Re: DIY QubIDE Parts list

Postby axeman » Mon Jun 24, 2019 1:57 pm

Brilliant! thanks Dave.

Can't wait to get his built.



Who is online

Users browsing this forum: No registered users and 9 guests