I recently sold a Merlin Tonto which initially displayed 6 vertical bars (SVRAM issue according to the field notes). After replacing the processor board, and general tidying up the machine, it was working.
I then used it for a while only to have the PSU (in the monochrome monitor) go up in smoke.
I replaced the X1 filter capacitor (as normal), but after a while of use, the monitor output failed altogether - on further investigation it looked as though it might just be one of the capacitors on the monitor itself which had a dry joint (in fact the leg was dangling in mid air).
The Tonto was still working, as I could get it to access the microdrives.
The customer was happy to take it as is and repair the monitor.
He has now replaced the PSU completely with a new Mean-Well PT-65A PSU (you can find out details of his efforts on the new Facebook group - https://www.facebook.com/groups/232827397500181)
However, the 6 vertical bars are back, and he can't get past them. He has changed the processor board (with 2 alternatives), and even replaced the SVRAM, but nothing seems to fix this issue.
Has anyone else experience of this and how to get around it?
ICL OPD / Merlin Tonto Issues
-
- RWAP Master
- Posts: 2839
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
ICL OPD / Merlin Tonto Issues
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
-
- Gold Card
- Posts: 433
- Joined: Tue Mar 11, 2014 8:00 pm
- Location: Oxford, UK.
- Contact: