ICL OPD / Merlin Tonto Issues

Nagging hardware related question? Post here!
RWAP
RWAP Master
Posts: 2522
Joined: Sun Nov 28, 2010 4:51 pm
Location: Stone, United Kingdom
Contact:

ICL OPD / Merlin Tonto Issues

Postby RWAP » Mon Jul 16, 2018 10:18 pm

I recently sold a Merlin Tonto which initially displayed 6 vertical bars (SVRAM issue according to the field notes). After replacing the processor board, and general tidying up the machine, it was working.

I then used it for a while only to have the PSU (in the monochrome monitor) go up in smoke.

I replaced the X1 filter capacitor (as normal), but after a while of use, the monitor output failed altogether - on further investigation it looked as though it might just be one of the capacitors on the monitor itself which had a dry joint (in fact the leg was dangling in mid air).

The Tonto was still working, as I could get it to access the microdrives.

The customer was happy to take it as is and repair the monitor.

He has now replaced the PSU completely with a new Mean-Well PT-65A PSU (you can find out details of his efforts on the new Facebook group - https://www.facebook.com/groups/232827397500181)

However, the 6 vertical bars are back, and he can't get past them. He has changed the processor board (with 2 alternatives), and even replaced the SVRAM, but nothing seems to fix this issue.

Has anyone else experience of this and how to get around it?


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 1 guest