Issue 8 fork in the road...

Nagging hardware related question? Post here!
Post Reply

Should the IO ports be on the main board or a daughter board?

Poll ended at Sun Apr 29, 2018 5:48 pm

IOs on one board.
1
25%
IOs on a separate board.
3
75%
 
Total votes: 4

User avatar
Dave
SandySuperQDave
Posts: 2765
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Issue 8 fork in the road...

Post by Dave »

Just collecting some opinions here.... I've been working a little more on Issue 8.

I think around half would be used in QL cases and half would be used to replace QL mainboards in (S)GC systems... It is important to me that the Issue 8 is compatible with QL cases, both UK and non-UK models. However, the serial and joystick BT ports cannot be had anywhere, so D-SUB is required.

Given the high cost of 4-layer PCBs as used in the Issue 8, I had the notion of having all the main processing be on a smaller Issue 8 board that has 4 layers, and is just the 96mm needed to properly support the expansion connector. The IO could be on a separate 2-layer board that plugs into the mainboard. This could be directly, or on a cable allowing the IOs to be relocated if the board was used in an external case.

There are good arguments for both arrangements.

Being unable to pick a clear winner, I decided to let you choose! Also, feel free to mention any other possible advantages of either approach.


Post Reply