Replacement microdrive pads what to use
-
- Chuggy Microdrive
- Posts: 51
- Joined: Mon Feb 16, 2015 8:42 pm
Replacement microdrive pads what to use
Hi all
I am new to the world of the QL and trying to work things out my problem is the only microdrive cartridges I had which were new old stock from sell my retro have decided to lose there pads all at once.
So now I have no cartridges (I am waiting for 20 used cartridges coming but they will probably want replacing as well)I know there was a source of replacement pads but they are no longer available so is there a substitute I can use or has anyone got any of the replacement pads that I could buy off them.
Any help would be appreciated.
Cheers
Mark
I am new to the world of the QL and trying to work things out my problem is the only microdrive cartridges I had which were new old stock from sell my retro have decided to lose there pads all at once.
So now I have no cartridges (I am waiting for 20 used cartridges coming but they will probably want replacing as well)I know there was a source of replacement pads but they are no longer available so is there a substitute I can use or has anyone got any of the replacement pads that I could buy off them.
Any help would be appreciated.
Cheers
Mark
-
- Aurora
- Posts: 933
- Joined: Sat Oct 25, 2014 9:53 am
Re: Replacement microdrive pads what to use
Hi Mark
Been there, done that, too!
Whilst my 2nd-hand MDV cartridges still only last a week or so after 'pad-repair', its buying me time whilst I build my own RAM and NV RAM (in place of EPROM) expansion so that I can run some simple programs straight from the NV RAM without ever having to rely on another MDV again!
I have been using (to get the aforementioned few weeks of life out of my cartridges) some double-sided sticky-pads, spliced in half (they are too thick and you need a non-sticky side...) and then cut to the appropriate size using a craft knife. Getting quite a dab-hand at it now...
You will see reference on this forum to a gentleman called 'Dave' who used to fabricate such pads, but is currently taken-up with real-life again.
We are all waiting for Dave's next QL project
Been there, done that, too!
Whilst my 2nd-hand MDV cartridges still only last a week or so after 'pad-repair', its buying me time whilst I build my own RAM and NV RAM (in place of EPROM) expansion so that I can run some simple programs straight from the NV RAM without ever having to rely on another MDV again!
I have been using (to get the aforementioned few weeks of life out of my cartridges) some double-sided sticky-pads, spliced in half (they are too thick and you need a non-sticky side...) and then cut to the appropriate size using a craft knife. Getting quite a dab-hand at it now...
You will see reference on this forum to a gentleman called 'Dave' who used to fabricate such pads, but is currently taken-up with real-life again.
We are all waiting for Dave's next QL project
Re: Replacement microdrive pads what to use
You might be waiting a while.
The only thing I am doing right now is the assembly of these 20-odd Auroras and matching backplanes. I won't be working on anything else until at least September. The economic ruin of going out of business hit me pretty hard and I decided to only do things or say I'll do things if I have already done them
Waiting until September allows me time to clean up all the mess I left behind and get everything where it needs to be.
Dave
The only thing I am doing right now is the assembly of these 20-odd Auroras and matching backplanes. I won't be working on anything else until at least September. The economic ruin of going out of business hit me pretty hard and I decided to only do things or say I'll do things if I have already done them
Waiting until September allows me time to clean up all the mess I left behind and get everything where it needs to be.
Dave
-
- Aurora
- Posts: 933
- Joined: Sat Oct 25, 2014 9:53 am
Re: Replacement microdrive pads what to use
*sigh* thank the postal service and the bills...
It'll come right in the end.
It'll come right in the end.
Re: Replacement microdrive pads what to use
What is the problem with the Microdrive pads? I think yours are meaning the "felt" which presses the tape to the write head?
I have now had a look to my old cartridges (from the middle of the eighties - then I had 2x720 KB floppies), they (the pads) are still there and seem to be in good condition. Albeit I have not yet tested the cartridges, as all my three QLs are in cardboards :-(
Perhaps I shall pull out my German QL (nearly as new) and will test the cartridges at the weekend.
p.s.: At native English speakers: Is my last sentence correct. In school I have had learned you must use "shall" when using "I", but I'm not sure if now you also may/should use "will"?
I have now had a look to my old cartridges (from the middle of the eighties - then I had 2x720 KB floppies), they (the pads) are still there and seem to be in good condition. Albeit I have not yet tested the cartridges, as all my three QLs are in cardboards :-(
Perhaps I shall pull out my German QL (nearly as new) and will test the cartridges at the weekend.
p.s.: At native English speakers: Is my last sentence correct. In school I have had learned you must use "shall" when using "I", but I'm not sure if now you also may/should use "will"?
http://peter-sulzer.bplaced.net
GERMAN! QL-Download page also available in English: GETLINE$() function, UNIX-like "ls" command, improved DIY-Toolkit function EDLINE$ - All with source. AND a good Python 3 Tutorial (German) for Win/UNIX
GERMAN! QL-Download page also available in English: GETLINE$() function, UNIX-like "ls" command, improved DIY-Toolkit function EDLINE$ - All with source. AND a good Python 3 Tutorial (German) for Win/UNIX
-
- Aurora
- Posts: 933
- Joined: Sat Oct 25, 2014 9:53 am
Re: Replacement microdrive pads what to use
Hi there our German speaking friend!
Most (younger) English people wouldn't have a clue which form to use ('shall' or 'will'), but you are quite right - 'shall' for first-person (singular or plural), 'will' for second, or third-person.
To be honest, I had to refresh my own memory - see the following link:
http://www.oxforddictionaries.com/words/shall-or-will
Most (younger) English people wouldn't have a clue which form to use ('shall' or 'will'), but you are quite right - 'shall' for first-person (singular or plural), 'will' for second, or third-person.
To be honest, I had to refresh my own memory - see the following link:
http://www.oxforddictionaries.com/words/shall-or-will
Re: Replacement microdrive pads what to use
Thank you!
http://peter-sulzer.bplaced.net
GERMAN! QL-Download page also available in English: GETLINE$() function, UNIX-like "ls" command, improved DIY-Toolkit function EDLINE$ - All with source. AND a good Python 3 Tutorial (German) for Win/UNIX
GERMAN! QL-Download page also available in English: GETLINE$() function, UNIX-like "ls" command, improved DIY-Toolkit function EDLINE$ - All with source. AND a good Python 3 Tutorial (German) for Win/UNIX
-
- RWAP Master
- Posts: 2839
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: Replacement microdrive pads what to use
Before testing the cartridges, hold the cartridge up to the light - if there is daylight showing through the felt pad - don't use it - it will disintegrate and may jam up the tape...
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
- Mr_Navigator
- QL Fanatic
- Posts: 782
- Joined: Mon Dec 13, 2010 11:17 pm
- Location: UK, Essex
- Contact:
Re: Replacement microdrive pads what to use
That's a new spin on "I see the light"RWAP wrote:Before testing the cartridges, hold the cartridge up to the light - if there is daylight showing through the felt pad - don't use it - it will disintegrate and may jam up the tape...
-----------------------------------------------------------------------------------
QLick here for the Back 2 the QL Blog http://backtotheql.blogspot.co.uk/
QLick here for the Back 2 the QL Blog http://backtotheql.blogspot.co.uk/