Wrist Rest Gel

A place to discuss general QL issues.
User avatar
dilwyn
Mr QL
Posts: 2753
Joined: Wed Dec 01, 2010 10:39 pm

Wrist Rest Gel

Post by dilwyn »

Some gel from a keyboard wrist rest has leaked out of a wrist rest onto the laminate finish of my computer desk.

I've wiped up what I can with a damp cloth then used a moist wipe to clear up as much as possible. However, the desk surface is still a bit sticky - it feals a bit like some of the silicon sealant you use around bathroom or window edges, I don't know if these wrist rest things use silicon gel inside or what.

Anyone got any idea of how best to clear it up without damaging the desk surface too much?

(I'm presuming it's non-toxic unless ingested!)


User avatar
Cristian
Aurora
Posts: 960
Joined: Mon Feb 16, 2015 1:40 pm
Location: Veneto

Re: Wrist Rest Gel

Post by Cristian »

If the gel is silicone-based, you may try with hot water, or a hot damp cloth


User avatar
Ruptor
Gold Card
Posts: 418
Joined: Fri Dec 20, 2019 2:23 pm
Location: London

Re: Wrist Rest Gel

Post by Ruptor »

dilwyn wrote:Anyone got any idea of how best to clear it up without damaging the desk surface too much?
What about using Cellotape? Some sticky things prefer sticking to the tape and leave the surface. If the desk is real wood you will probably have to feed it with polish to restore the lustre. :)


User avatar
tofro
Font of All Knowledge
Posts: 2685
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: Wrist Rest Gel

Post by tofro »

Alcohol will probably remove the stuff. In case it destroys the finish of your desk, Alcohol might help getting over it as well... ;)

Seriously, I'd start with water and a light detergent (like soap), continue with alcohol and think again before I'd resort to stronger stuff.


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
User avatar
NormanDunbar
Forum Moderator
Posts: 2251
Joined: Tue Dec 14, 2010 9:04 am
Location: Leeds, West Yorkshire, UK
Contact:

Re: Wrist Rest Gel

Post by NormanDunbar »

WD-40 is supposed to be able to remove silicone sealant. I've never tried as I suspect it leaves the sink etc unable to adhete to new silicone. It's very good at getting sticky black mastic from carpets though -- and I've done that!

Cheers,
Norm.


Why do they put lightning conductors on churches?
Author of Arduino Software Internals
Author of Arduino Interrupts

No longer on Twitter, find me on https://mastodon.scot/@NormanDunbar.
User avatar
vanpeebles
Commissario Pebbli
Posts: 2815
Joined: Sat Nov 20, 2010 7:13 pm
Location: North East UK

Re: Wrist Rest Gel

Post by vanpeebles »

Old aftershave is an effective cleaner too :)


User avatar
tofro
Font of All Knowledge
Posts: 2685
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: Wrist Rest Gel

Post by tofro »

vanpeebles wrote:Old aftershave is an effective cleaner too :)

But can render your office inhabitable for weeks!


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
User avatar
vanpeebles
Commissario Pebbli
Posts: 2815
Joined: Sat Nov 20, 2010 7:13 pm
Location: North East UK

Re: Wrist Rest Gel

Post by vanpeebles »

True :lol:


Martin_Head
Aurora
Posts: 847
Joined: Tue Dec 17, 2013 1:17 pm

Re: Wrist Rest Gel

Post by Martin_Head »

Surgical Spirit is good for the sticky residue left by labels. It's meant for your skin, so the desk is probably reasonably safe.


User avatar
dilwyn
Mr QL
Posts: 2753
Joined: Wed Dec 01, 2010 10:39 pm

Re: Wrist Rest Gel

Post by dilwyn »

Thanks everyone. I tried several of the suggestions with pretty good results.

Norman: I tried WD40 on a less obvious part of the desk and it damages the finish on this particular laminate. As does the cleaning alcohol, as my son found out when he tried it some time ago on a printer ink cartridge spillage. A little photo of the fading (on the bottom right of the pic) is attached. Not a problem, it's in an inconspicuous place.

I used the sticky tape to lift the worst of the gell, then finished cleaned off with hot soapy water, the combination seemed to work quite well.

Thank you everyone.
desk_surface.jpg


Post Reply