Re: How to work from CF card from QL in Q-emuLator?
Posted: Mon Feb 18, 2019 9:42 am
I followed the instructions that are attached to the file, but I'm doing something wrong.
Still can not attach any images.
See picture
Short description for Qemulator:
Attention! Works under 32bit Windows only.
1. Install Qemulator
2. Unpack Extension.zip to the qemulator folder - it should then look like this:
Program Files
Qemulator
Extension
QL_BDI.BIN
SD_Card.dll
3. BDI_RAM_Driver: unpack where you want
4. Start Qemulator an then stop it - increase the RAM in the settings to 384KB
5. Start Qemulator
6. Mount one of the slots with the directory where you have unpacked the BDI_RAM_Driver
7. Load the driver (for example: if the directory containing the BDI_RAM_Driver is connected to slot 4):
lrespr mdv4_BDI_bin
checking with:
dir sdc1_
Still can not attach any images.
See picture
Short description for Qemulator:
Attention! Works under 32bit Windows only.
1. Install Qemulator
2. Unpack Extension.zip to the qemulator folder - it should then look like this:
Program Files
Qemulator
Extension
QL_BDI.BIN
SD_Card.dll
3. BDI_RAM_Driver: unpack where you want
4. Start Qemulator an then stop it - increase the RAM in the settings to 384KB
5. Start Qemulator
6. Mount one of the slots with the directory where you have unpacked the BDI_RAM_Driver
7. Load the driver (for example: if the directory containing the BDI_RAM_Driver is connected to slot 4):
lrespr mdv4_BDI_bin
checking with:
dir sdc1_