Dump/edit file from microdrive

Helpful tips and guides, also new users can ask for help here.
Post Reply
Citizenfish
ROM Dongle
Posts: 10
Joined: Mon Apr 05, 2021 9:14 pm

Dump/edit file from microdrive

Post by Citizenfish »

I've got a few files on a microdrive and I am not sure what they are, for example one is named fata_aba another sss_doc

Is there a way of dumping these files? Similar to using head or less on unix?

EDIT looks like these are abacus and quill files. I don't have either program so can the line editor be used?


User avatar
NormanDunbar
Forum Moderator
Posts: 2251
Joined: Tue Dec 14, 2010 9:04 am
Location: Leeds, West Yorkshire, UK
Contact:

Re: Dump/edit file from microdrive

Post by NormanDunbar »

Head over to Dilwyn's fine web site and grab the latest versions of Quill/Abacus. It's at http://www.dilwyn.me.uk/psions/index.html there are versions for microdrive and floppy as required.

These files are in a specific format and contain numerous binary characters that a text editor will probably choke on. There are, for example, in the Qull doc, control codes embedded in the paragraph text to toggle on and off various text attributes like bold, underlined etc. Your chances of a successful extract of the data are slim I'm afraid.

HTH

Cheers,
Norm.


Why do they put lightning conductors on churches?
Author of Arduino Software Internals
Author of Arduino Interrupts

No longer on Twitter, find me on https://mastodon.scot/@NormanDunbar.
Citizenfish
ROM Dongle
Posts: 10
Joined: Mon Apr 05, 2021 9:14 pm

Re: Dump/edit file from microdrive

Post by Citizenfish »

Thanks

The biggest problem I can see is getting those files onto Microdrive


User avatar
Chr$
QL Wafer Drive
Posts: 1304
Joined: Mon May 27, 2019 10:03 am
Location: Sachsen, Germany
Contact:

Re: Dump/edit file from microdrive

Post by Chr$ »

Citizenfish wrote:Thanks

The biggest problem I can see is getting those files onto Microdrive
That depends what other hardware you have available, e.g. an FLP1_ floppy drive or a WIN1_ HDD setup, serial cable (with BT connector for the QL-end) or some other modern alternatives.

If you just have a standalone QL with nothing else then you're a bit stuck. I do sell blank carts that are pretty good and could certainly put the Psion software onto those, but then there would be no guarantee that your _aba and _doc files are readable... and even if they are, the content may not be worth going to much trouble for!


https://QXL.WIN
Collector of QL related computers, accessories and QL games/software.
Ask me about felt pads - I can cut them to size and they have proved excellent for mdv data recovery.
Citizenfish
ROM Dongle
Posts: 10
Joined: Mon Apr 05, 2021 9:14 pm

Re: Dump/edit file from microdrive

Post by Citizenfish »

I'd happily buy a md with Quill on it. Let me know details


User avatar
tofro
Font of All Knowledge
Posts: 2685
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: Dump/edit file from microdrive

Post by tofro »

You can simply copy the file to scr_ in order to dump it to a console, like in

Code: Select all

COPY mdv1_sss_doc TO scr_
That might give you some textual hints on what is in there. You can stop the "scrolling by" of the file by pressing <CTRL>+F5. Note you will be seeing a lot of glibberish around the actual text.


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
Post Reply