Search found 144 matches
- Tue Sep 26, 2017 3:45 pm
- Forum: Hardware
- Topic: QL ROM switcher
- Replies: 29
- Views: 15844
Re: QL ROM switcher
This is a good idea for a project, tetroid. I would suggest including these versions: JM ( fairly common in UK, useful for testing software, fairly similar to AH) JS (most common uk rom) MG - some of the most widely used national variants such as French/German), note that MGUK is a private non Sinc...
- Tue Sep 26, 2017 3:39 pm
- Forum: Hardware
- Topic: QL ROM switcher
- Replies: 29
- Views: 15844
Re: QL ROM switcher
Sadly, no... On the QL the ROMOEH line that selects the ROM is only generated for read cycles, and writes are necessary for programming the Flash chip in-circuit. Even worse, if a GC or SGC is used, the board does not even generate write cycles on the bus when addressing these addresses :( I maybe ...
- Mon Sep 25, 2017 2:14 pm
- Forum: Hardware
- Topic: QL ROM switcher
- Replies: 29
- Views: 15844
Re: QL ROM switcher
Thank you , good idea.vanpeebles wrote:That looks great! Would it be possible to have the switches on the end of a long cable? (To save opening the QL)
It is only necessary to find a place on the case, where to mount this switch.
- Sun Sep 24, 2017 11:26 pm
- Forum: Hardware
- Topic: QL ROM switcher
- Replies: 29
- Views: 15844
QL ROM switcher
I seen Minerva ROM based on standard 27C512 ROM and I think is not easy to install on standard QL ROM socket, bacause of its big physical size. I am try to make more flat ROM replacement. http://cats-chess.narod.ru/QL/PICS/ROMSW02.jpg http://cats-chess.narod.ru/QL/PICS/ROMSW03.jpg http://cats-chess....
- Thu Sep 07, 2017 6:57 am
- Forum: Hardware
- Topic: Tetroid interfaces hardware info
- Replies: 42
- Views: 21700
Re: Tetroid interfaces hardware info
I have original INGIT5 JEDEC.tofro wrote:Just out of interest:
In your GoldCard clone, have you re-engineered the CPLD equations? I thought the Ingot JEDEC wasn't known yet?
Thanks
Tobias
- Mon Sep 04, 2017 8:44 pm
- Forum: Hardware
- Topic: Tetroid interfaces hardware info
- Replies: 42
- Views: 21700
Re: Tetroid interfaces hardware info
Thank you very much.
I will try to make it.
I will try to make it.
- Sun Sep 03, 2017 8:26 pm
- Forum: Hardware
- Topic: Tetroid interfaces hardware info
- Replies: 42
- Views: 21700
Re: Tetroid interfaces hardware info
Hi Tedroid The one modification that could add value and use some (though not all) of the spare 256KB SRAM - and would require NO software adjustment - is the shadowing of the first 128KB of standard QL memory. Its pretty trivial to accomplish and results in WRiting to both SRAM and internal 128KB ...
- Sun Sep 03, 2017 8:26 pm
- Forum: Hardware
- Topic: Tetroid interfaces hardware info
- Replies: 42
- Views: 21700
Re: Tetroid interfaces hardware info
No, used only 768Kb of 1Mb. I can add this memory, If anybody will advise the way to inplementing additional 256K into QL memory map, supporting by software. As far as I am aware, even the old OS versions support 2M of RAM but the CPU does not have the required size of the address map (1M total). F...
- Sun Sep 03, 2017 5:57 pm
- Forum: Hardware
- Topic: Tetroid interfaces hardware info
- Replies: 42
- Views: 21700
Re: Tetroid interfaces hardware info
No, used only 768Kb of 1Mb.
I can add this memory, If anybody will advise the way to inplementing additional 256K into QL memory map, supporting by software.
I can add this memory, If anybody will advise the way to inplementing additional 256K into QL memory map, supporting by software.
- Sat Sep 02, 2017 6:36 am
- Forum: Hardware
- Topic: Tetroid interfaces hardware info
- Replies: 42
- Views: 21700
Re: Tetroid interfaces hardware info
Nasta wrote:
Eh, I was hoping you had the 2V4 equations - the circuit seems a bit odd and I was looking forward to figuring out how it works
2V4 PAL16L8 euations