The Sinclair QL Forum

I am considering a slightly larger Q68 case, with added height to accommodate the I2C and QL Net Connectors on the rear end plate, which would save drilling into the case side wall. The new case would have an added 15mm in height, which would give enough space on the Rear Panel to accommodate the I2...

Hi Martyn,

OK, thanks for the comment.

Hi, I must apologise for the condition of the Q68 end plates. The end plates are made from black anodised laser cut plates, with all the required holes CNC machined. The problem is with the paint adherence to the metal, which I use a high temperature melting paint so that the paint could be baked to...

Hi, I am sorry for the flaking of the paint, the problem is the way the panels have been made, the panels are Anodised Aluminium, with the edges bare metal where the machining process has been performed. The paint used was a high temperature painted, baked to 120 Deg C, but clearly this is not suita...

Hi, In the picture is showing your 8302, there is a pin that is bent and possibly giving an intermittent connection. The bent pin 21 is not standard on all QLs, only all example of someone not fitting the chip correctly. You need to remove the 8302 and straighten the bent 21 pin, clean the pin legs ...

From Rich at RWAP (via sellmyretro.com): Mug (or indeed the coffee) not included ;) I'm looking to install it over the weekend. My QL is rather prone to key bounce, so hopefully this solves it. Can someone put the disk on Dilwyn's site, or here? I have an Hermes, but not the disk. Here you are... H...

Hi,

There does not seem to be any information anout the QL Issue 7 board.

I have some Otadrives to make, I have QL Issuse 5,6,7 so can do comparisons.

Hi, Nearly finished the checking of ebook. But I have come across an issue: I have come across a problem with an example code fragment in the physical book, for the use of IO.SERIO or IOU.SSIO in SMSQ/E. The example in the Advanced QL User Guide, uses the same example in the QL Technical and the SM...

Hi, Nearly finished the checking of ebook. But I have come across an issue: I have come across a problem with an example code fragment in the physical book, for the use of IO.SERIO or IOU.SSIO in SMSQ/E. The example in the Advanced QL User Guide, uses the same example in the QL Technical and the SMS...

....is it a QXL v1 or v2?