The Sinclair QL Forum

Hi Martin. I have tried the new firmware version and now everything works fine. The use is very easy, load the driver with LRESPR and everything works fine as "plug and play". I have tested QLnet from QPC2 in client mode without any incident, I can copy files and run executable programs lo...

Hi Martin. I have verified all the points that you indicate. The wiring is correct, the ROM version that I use in my QL-SGC is Minerva and in all stations I use SMSQ/E 3.38 as operating system. The network driver version in Q68 is 3.05 (ndq68_drv_305). The QLNET network between my QL-SGC and Q68 wor...

Did you already have this working before trying the new driver? Hi Martin. Thank you for your support! Yes, I had tried file transfers with SendFileMQ few months ago and the result was satisfactory. Now, with the new firmware and the new version of SendFileMQ I can't do the file transfer. I am tryi...

Hi Martin. Great!!! That is excellent news!!!. QLNET is one of the most fun features of the QL, and your driver is a great gift for QDOS/SMSQ enthusiasts. I have been trying to install the driver following your detailed instructions from this post but unfortunately I have not been able to get it to ...

I thought the idea of the QLUB was to use the QL Network device driver to connect QPC2 and QL. Is this not the case? Hi Derek, as far as I know, Martin has released the Teensy2 software and a file transfer utility (SendFileMQ_bas). The driver for using the QL.NET network with QLUB from the PC emula...

(I've asked the question in another thread, but perhaps it's more appropriate here).

Is the native QDOS driver for QL Network access with QLUB available yet?

Derek_Stewart wrote:... Okay, you may not have a Q68, so QLUB by Martin Hill can connect the QL Network to QPC2, which QPC2 can read the .win directly and copy over the Network to the QL....

By the way, is the native QDOS driver for QL Network access with QLUB available yet?

Maybe a peek into the QL case with the finished baseboard and Qzero plugged in. qlbase_qlcase_inside.jpg Although it does not look like, it is actually possible to connect the QL keyboard directly. (USB-PS/2 combo keyboard also supported internally.) Joystick not tested yet, as I don't own one. But...

I'm curious how the hybrid approach of using a QL baseboard plus the Qzero as CPU module will work out. On one hand it means extra costs and work. Two boards are always more expensive than one, and more connectors are required. On the other hand it adds flexibility. Like going without Qzero and att...

This is how the prototyping PCB for my new QL mainboard looks: tmp.jpg Before some get too optimistic: It won't support the microdrives, which will be replaced by SD card "drives". However, the original microdrive LEDs and the corresponding internal connector will be supported, to preserv...