The Sinclair QL Forum

Hi mk79. I have tried the new driver with MiST, everything works correctly, the win1_ unit is recognized. But I have a problem, when I try load TK2 (ram version), the system crashes. This does not happen with original version. After loading the new driver I execute this: base=RESPR(16384):LBYTES win...

My CF cards have already arrived.

Dilwyn, Tim, ... thank you very much!


PD:
That little gift has a lot of value for the QL community.

Welcome Quickie, .... bienvenido!! Es estupendo ver a otro compatriota más por aquí. Varios de entusiastas de habla castellana del QL solemos pasarnos de vez en cuando por este fantástico foro. Mira también este enlace con información variada sobre retroinformática y el Sinclair QL. https://sinclair...

I had some similar problems with my classic GoldCard and HDD (1.4MB) PC drives.

In my system, with these commands in the boot, everything works correctly:

FLP_JIGGLE 1
FLP_DENSITY 'H'

I have installed SMSQE 3.33 versión in my Q68 and I have obtained a different behavior in the "Initialize card 2 when booting" option (in Q68 config). The "Only if a drive is located there" value behaves differently than version 3.32. For FAT drive work properly in my card 2, I h...

Peter wrote:Out of curiosity, what did you use on the other side? A PC with QPC?

Yes, I used a PC with QPC2, all work fine.


PD:
But my tests with QemuLator/SMSQE on the PC did not work. I do not know the reason. (I checked the configuration of the COM ports in QmuLator and apparently it is correct).

Connect two Q68, or one Q68 and one PC, with a normal PC nullmodem cable. Configure sernet_rext to correct receive/send names, e.g. SRX1id and STX1id, then try this: BAUD 115200 LRESPR sernet_rext SNET 1 SERNET On the other side the same, just a different station number, e.g. SNET 2 Then e.g. try D...

What kind of serial port do you have on PC side? My PC motherboard has an integrated COM port (COM1). For typical usage like COPY or SERNET this was tested from PC to Q68, and should be no problem. I have never been able configure SERNET satisfactorily. Is there a tutorial (step by step type) about...

Hi. Last week I've been testing serial interface with my Q68. The results have been very good, especially with Ser-USB, but I have some doubts in my data transfer tests between Q68 and PC. I report my expereinces separately, a) Ser-USB test and b) PC to Q68 transfer tests. a) Ser-USB test. The resul...

The SD content with print card_dir$ (1) is as follows I'm just guessing, but that FAT32 directory looks suspicious to me. You should only have files with 8.3 filenames in the toplevel directory. Maybe save the OS binary and the filesystem containers, reformat the SDHC card, and copy them back. What...