Hi,
If you can type AT and get OK back, the modem is connected to the computer correctly.
You can get information of the modem configuration and connections using the ATI command.
Type: ATIx where x = 0 to 3
i.e. AT0 or ATI1
The sparse manual says AT? gives list of the commands.
Search found 3966 matches
- Sat Apr 13, 2024 2:34 pm
- Forum: Help for New Users
- Topic: QLTerminal v2.35 with TheOldNet WiFi v4
- Replies: 26
- Views: 699
- Sat Apr 13, 2024 9:27 am
- Forum: Help for New Users
- Topic: QLTerminal v2.35 with TheOldNet WiFi v4
- Replies: 26
- Views: 699
Re: QLTerminal v2.35 with TheOldNet WiFi v4
Hi,
Can you try switching off the local echo, with ATE0
Also try AT? for a list of the commands.
This is guesswork, as I do no have this modem.
Can you try switching off the local echo, with ATE0
Also try AT? for a list of the commands.
This is guesswork, as I do no have this modem.
Re: Q40/Q60
Peter wrote : Curious if someone gets it to work on an up-to-date OSSC. Hi Peter, I bought an OSSC Kaico v1.6 scan doubler from Amazon for my Q60 during lockdown. Yes it was a bit pricey but I wasn't able to spend on much else, and if you think about the price of the scan doubler to what I paid for...
- Thu Apr 11, 2024 7:22 pm
- Forum: General QL Chat
- Topic: Sad news from Italy - RIP Romaldo Parodi
- Replies: 7
- Views: 332
Re: Sad news from Italy - RIP Romaldo Parodi
Hi,
There is a Sinclair QL Italy mailing list, all messages in Italian.
Thry this link to subscribe:
https://www.freelists.org/list/sinclair-italy
There is a Sinclair QL Italy mailing list, all messages in Italian.
Thry this link to subscribe:
https://www.freelists.org/list/sinclair-italy
- Thu Apr 11, 2024 11:49 am
- Forum: Software & Programming
- Topic: My Little Menu Launcher
- Replies: 8
- Views: 279
Re: My Little Menu Launcher
Hi,
Can you not make a image file and use MDI to load from QIMSI.
If the game is too large for a MDV image, then use FDI.
Can you not make a image file and use MDI to load from QIMSI.
If the game is too large for a MDV image, then use FDI.
- Wed Apr 10, 2024 6:20 pm
- Forum: Hardware
- Topic: Serial port confusion.
- Replies: 18
- Views: 3920
Re: Serial port confusion.
Hi,
You can set the Baud rate of the serial port to the maximum, using the S*Basic BAUD command, then set the Modem Baud Rate to the maximum the modem supports and can connect from the BBS.
You can set the Baud rate of the serial port to the maximum, using the S*Basic BAUD command, then set the Modem Baud Rate to the maximum the modem supports and can connect from the BBS.
- Wed Apr 10, 2024 4:15 pm
- Forum: Hardware
- Topic: Serial port confusion.
- Replies: 18
- Views: 3920
Re: Serial port confusion.
The wiring diagram, detailed above works perfectly with SER2 and the Simulant WIFI Mode,, for SER1 an interchange of the contol lines is required.
I thought about having a switchable serial cable to switch between SER1/2, I have get a proto-type made.
A simple cable from QIMSI SER3 would also work.
I thought about having a switchable serial cable to switch between SER1/2, I have get a proto-type made.
A simple cable from QIMSI SER3 would also work.
Re: PiStorm
I have an Amiga A500, with a PiSorm that just needs setting up, I can try it with QDOS Classic. That would be an important check. If possible, please try the qdos-gcc compiled Dhrystone benchmark on both EMU68 and Musashi. Hi, I have got qdos-gcc compiled on my Linux computer, so I can try compilin...
Re: PiStorm
Hi,
I have an Amiga A500, with a PiSorm that just needs setting up, I can try it with QDOS Classic.
I am going to sell all the Amiga stuff on eBay, as I do not need them, I have a Amiga A600, but no PiStorm.
I have an Amiga A500, with a PiSorm that just needs setting up, I can try it with QDOS Classic.
I am going to sell all the Amiga stuff on eBay, as I do not need them, I have a Amiga A600, but no PiStorm.
- Fri Apr 05, 2024 6:53 am
- Forum: Hardware
- Topic: Q68 Advance Notice
- Replies: 78
- Views: 53603
Re: Q68 Advance Notice
Hi,
I have replied to your PM request and I have recorded your details.
I will contact you directly, when I can complete the order.
I have replied to your PM request and I have recorded your details.
I will contact you directly, when I can complete the order.