The Sinclair QL Forum

Dave - you can always build your own - see here and here . There is enough information to at least build the USB version. There is a lot of information also on the SD card version. If you have any questions, I'm sure Jean-François (Jeff) will answer your questions. Also do not confuse the developer ...

Okay, not having a QL schematic diagram in front of me, but going on typical use in the electronics industry... Capacitors labeled as DC are likely to be capacitors used to decouple the power supply tracks/traces, hence DC for decoupling capacitor. FT is likely to mean front, BK and is likely to mea...

Aye, Merry Christmas!

Mark

I would be happy to second the nomination of Dave

You may have to kick me, as I will need to do it remotely and will need reminding.

Mark

Welcome to the Chuggy Microdrive club

Mark

Bung some more coal on the fire and give it a good stoke

Mark

First of all, measuring of the PSU is kind of irritating. Therefor I measured on my open QL as well to be shure. The QL needs 1.8 A at 9V DC and 0.2A at 15.6V AC. I guess the voltage is not THAT important, the psu states 15.6VAC Hopefully 12V is sufficient. The middle pin is ground reference and AC...

Welcome on board Alexandre!



I wish you good luck with your projects

Mark

vanpeebles wrote:Maybe that's a requirement for show, plenty of tea and biscuits!

If chocolate Hobnobs and tea are on offer, I will have to make an effort to attend
What about cake?

Mark

I really don't know how people can commute on trains, it would drive me mad (and skint) :lol: Travelling to off-topic :? , but workplace subsidised train (about 35 to 40 mins) vs. Bristol's 5mph nearly all day "rush hour" traffic (anywhere between 45 mins on a good day to over an hour to ...