The Sinclair QL Forum

Hi Daniele,

I now have the capture file (no idea if it's got valid data) and it's 11.3mb (or 10.7mb zipped)

How do you want me to get the file to you please?

Many thanks
Tony

I had a spare mdv cable so I decided to sacrifice it

Tried doing the capture but only got signal on 1 channel

After a bit of testing I’ve found one of the hook cables I was using has no continuity

Will try again this weekend with a different cable

Many thanks

Hi Daniele, I think I have all the Hardware & Software ready to go BUT I can't get the "hooks" to latch onto the MD cable Any thoughts on what else I can do please? Many thanks For outside, you can get some kind of edge connector and connect the probe to it. Or if you are opening your...

Hi Daniele,

I think I have all the Hardware & Software ready to go BUT I can't get the "hooks" to latch onto the MD cable

Any thoughts on what else I can do please?

Many thanks

I now have these items: Not sure if on Mac it's the same, but on Windows often the logic analyzer won't immediately be seen by PulseView (try using fx2lafw type). When that happens, the Zadig utility (comes with PulseView) can be used to install the proper firmware. After that, it should then show ...

The DISK.DRIVER file is quite interesting as it is assembler source code and if compiled would have a file header (the first few lines define the header) But 68K/OS (or ADAM) does load it and make the "DISK:" device available, which would suggest ADAM can compile assembler on the fly? When...

Attached is a zip of the files on the 68K/ASM (2 are zero bytes, but they are the same on the original master and I don't think they are important) I got excited because it includes a "DISK:" device driver, which I can load on the real 68K/OS, giving me the DISK: device but obviously I can...

t0nyt wrote: ↑Mon May 06, 2024 8:42 pm Hi Daniele,

Have ordered a logic analyser and hooks, will let you know when they arrive

Thanks
Tony

HI Daniele,

I now have these items:

Just to say a big thanks for the pinch rollers, J

Have fitted them and MDV2 in my main QL (which broke down a week or so ago) is now back functioning

Many thanks

Edited original post to remove QL Cavern