Search found 25 matches
- Thu Apr 25, 2013 6:47 pm
- Forum: Help for New Users
- Topic: Problems with File Operations and Disks....
- Replies: 5
- Views: 5962
Re: Problems with File Operations and Disks....
Thank you for the detailed anwer. Now it looks like this: The problem could be the QL itself: Two times QL Cavern started from a disk (copied with Qemulator to a QL-formatted DD disk. But only two times :( Then I tried to load QUILL's clone from an old cartridge and the same (?) problem occurs: MDV ...
- Sun Apr 21, 2013 11:09 am
- Forum: Help for New Users
- Topic: Problems with File Operations and Disks....
- Replies: 5
- Views: 5962
Re: Problems with File Operations and Disks....
Yes, I taped them...
- Sun Apr 21, 2013 9:43 am
- Forum: Hardware
- Topic: *** SOLVED *** 3.5 " floppy connection to qdisc interface
- Replies: 34
- Views: 21254
Re: *** SOLVED *** 3.5 " floppy connection to qdisc interfac
Hello Dilwyn, I format them with 720KB on both drives...
- Sun Apr 21, 2013 8:42 am
- Forum: Help for New Users
- Topic: Problems with File Operations and Disks....
- Replies: 5
- Views: 5962
Problems with File Operations and Disks....
Hello, I have some problems with my disk drives, controller and/or QL - I don't know :roll: As a controller I use a Sandy Board with 512KB and the drives are a "modern" TEAC (1,44MB) and an old TEAC (720KB; Atari ST). The disks I have are used HD disks, formatted to 720KB. And the QL is a ...
- Sat Apr 20, 2013 8:26 pm
- Forum: Hardware
- Topic: *** SOLVED *** 3.5 " floppy connection to qdisc interface
- Replies: 34
- Views: 21254
Re: *** SOLVED *** 3.5 " floppy connection to qdisc interfac
It seemed that there was no system in the appearence of the problems.
But to be honest - I have to clean up my desk and mark the available disks.
Then I have to make tests to find out, which drive can read/write which disks and if there is a pattern visible...
But to be honest - I have to clean up my desk and mark the available disks.
Then I have to make tests to find out, which drive can read/write which disks and if there is a pattern visible...
- Sat Apr 20, 2013 7:39 pm
- Forum: Hardware
- Topic: *** SOLVED *** 3.5 " floppy connection to qdisc interface
- Replies: 34
- Views: 21254
Re: *** SOLVED *** 3.5 " floppy connection to qdisc interfac
Hello, I have some problems with my disk drives. As a controller I use a Sandy Board with 512KB and the drives are a "modern" TEAC (1,44MB) and an old TEAC (720KB; Atari ST). The disks I have are used HD disks. And the QL is a German one (with German error messages - so I don't know the ex...
- Tue Mar 26, 2013 10:24 pm
- Forum: Hardware
- Topic: Monitor Connection?
- Replies: 8
- Views: 8355
Re: Monitor Connection?
... I had a cool black color monitor (Prism?) for our QL but now 25 years later I'm looking for an alternative to connect the QL to a modern VGA screen. What a coincidence that last week I could buy the same model PRISM QL 14 monitor we had in the good old days... :D It was offered on ebay as defec...
- Wed Nov 14, 2012 9:15 pm
- Forum: Hardware
- Topic: Crashes caused by heat?
- Replies: 8
- Views: 7068
Re: Crashes caused by heat?
Hello Tobias,
thanks for all your information and for the hint with these regulators.
I exchanged both - in the QL and on the disk controller.
System is working, so my modification didn't damage anything.
Let's see, if it will be more stable in the future.
thanks for all your information and for the hint with these regulators.
I exchanged both - in the QL and on the disk controller.
System is working, so my modification didn't damage anything.
Let's see, if it will be more stable in the future.
- Fri Nov 09, 2012 11:06 pm
- Forum: Hardware
- Topic: Crashes caused by heat?
- Replies: 8
- Views: 7068
Crashes caused by heat?
Hello, my QL crashes/freezes after some time of use. Could this be a general heat problem? I made a picture of the board with a disk interface attached on the left. This heat sink of the interface becomes VERY hot after a while! And does anybody knows, if these "modification" on the CPU ar...
- Mon Oct 22, 2012 8:11 pm
- Forum: Help for New Users
- Topic: how to get zipped files onto ql floppy pref. unzipped
- Replies: 19
- Views: 16380
Re: how to get zipped files onto ql floppy pref. unzipped
My unregistered Q-emulator version has about 300kB RAM.
With this it was possible to unzip at least one or two times before the memory error came.
Then I simply started the emulatur again...
With this it was possible to unzip at least one or two times before the memory error came.
Then I simply started the emulatur again...