Search found 50 matches

by bixio60
Sun Jun 23, 2019 9:26 am
Forum: Hardware
Topic: Aurora
Replies: 5
Views: 446

Aurora

Hi, during my last conversation with Tetroid he told me he will be happy to consider to clone the Aurora Card, but not having one available for him that will be impossible. May be someone of the readers will be happy to borrow one Aurora card to him, I did the same with my SuperGoldCard (After Crist...
by bixio60
Sat Jun 22, 2019 3:52 pm
Forum: Compatibles Corner
Topic: Q68 serial buffers
Replies: 13
Views: 940

Re: Q68 serial buffers

Jan, this is an interesting topic. may I suggest to write to QL-Users list? Wolfgang could be useful to answer this topic, but he reads only the mailing list. :) Fabrizio I've been doing some tests with the Q68's serial port. It's well known that it doesn't support flow control. So this means that i...
by bixio60
Tue Jun 18, 2019 7:54 pm
Forum: Software & Programming
Topic: Announcing availability of a QLNET driver for the Q68 (ND-Q68)
Replies: 45
Views: 2374

Re: Announcing availability of a QLNET driver for the Q68 (ND-Q68)

Peter, Derek,
QLnet it is very interesting and valuable and .....May be it is time for the "Q68 Plus" : with Cache and QLnet ?
I am afraid I am not able to do any hw mod on my Q68.

Fabrizio
by bixio60
Tue Jun 11, 2019 12:07 pm
Forum: Software & Programming
Topic: SuperCharge Decompiler
Replies: 53
Views: 6554

Re: SuperCharge Decompiler

Yes, this last version (0619) is definitively a step forward in the term of usability and easiness of the program. I am trying to decode the program Astrologer/Astronomer from DP and I got the error "assignArray is full", i did try different (bigger value) for the array but so far no succe...
by bixio60
Mon Jun 10, 2019 2:06 pm
Forum: Software & Programming
Topic: SuperCharge Decompiler
Replies: 53
Views: 6554

Re: SuperCharge Decompiler

Ditto! :)

..one of the most valuable project of the last years.
Fabrizio

martyn_hill wrote:Dear Martin

Just in case I forget to say it, your development of the Decompiler remains a truly valuable project for us and I for one am grateful for your on-going efforts!
by bixio60
Mon May 27, 2019 1:52 pm
Forum: Hardware
Topic: Help, connecting QL to BBS
Replies: 26
Views: 1388

Re: Help, connecting QL to BBS

Derek, I have up and running Rshell (Thierry Godefroy) BBS System on my Q68 using Retro Wifi SI and you could do the same. No need of TCPSer or other PC Internet aware, considering that with Retro Wifi SI the QL is Internet aware. The Retro WIFI is giving an IP address to the QL and is able to answe...
by bixio60
Sun May 26, 2019 9:06 pm
Forum: Hardware
Topic: Help, connecting QL to BBS
Replies: 26
Views: 1388

Re: Help, connecting QL to BBS

Hi, I experienced the same problem with BBQl.... ATS54=2 (DTR always High) solved the problem :D QL_WIFI.jpg I also tried, as you, to use my Huawei ( ) phone as tethering and it works perfectly.... Yes, work fine … ;) …. Are you using the BBQL? I am using Q68 or Q60 I never tried with QL.....when I ...
by bixio60
Fri May 24, 2019 7:42 pm
Forum: Hardware
Topic: Help, connecting QL to BBS
Replies: 26
Views: 1388

Re: Help, connecting QL to BBS

Unfortunately I cannot find anymore my old serial cable for BBQL ..... I need to buy another one. I found one on ebay that should fit. As for the Q68, the WiFi modem is too big to fit into q68 ser1 socket without interfering with VGA cable, so you have to buy a simple straight DB9 (9 pin) serial cab...
by bixio60
Fri May 24, 2019 1:03 pm
Forum: Hardware
Topic: Help, connecting QL to BBS
Replies: 26
Views: 1388

Re: Help, connecting QL to BBS

Hi, I have also Flow Control Disabled. I also tried, as you, to use my Huawei ( :o ) phone as tethering and it works perfectly.....I cannot replicate your problem.... i hope something will pop up in my brain Are you using the BBQL? I am using Q68 or Q60 I never tried with QL.....when I have time I w...
by bixio60
Thu May 23, 2019 9:48 pm
Forum: Hardware
Topic: Help, connecting QL to BBS
Replies: 26
Views: 1388

Re: Help, connecting QL to BBS

Hi, even if I normally use QTPI, I tried with QLterm and it works well. I suggest to use F3 to configure QLterm ---> Interface ---> ECHO Off ---> Buffered ---> SER2H ---> Baud(?) ----> None If you digit ATI, are you connected to your router ? Can you see your IP address ? Fabrizio Hi guys. Yesterday...