Floppy enclosure 3d print
Floppy enclosure 3d print
3d printed an enclosure for my floppy disk. Just need an interface now
__________________
And beyond it, the deep blue air, that shows
Nothing, and is nowhere, and is endless.
https://jbizzel.itch.io/
And beyond it, the deep blue air, that shows
Nothing, and is nowhere, and is endless.
https://jbizzel.itch.io/
-
Sparrowhawk
- Super Gold Card
- Posts: 651
- Joined: Wed Dec 15, 2010 12:33 pm
- Location: @131072
- Contact:
Re: Floppy enclosure 3d print
Oooh! Very nice work! Love the matt finish and the "QL" on the top.
a.k.a. Jean-Yves
-
Derek_Stewart
- Font of All Knowledge
- Posts: 3975
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Floppy enclosure 3d print
Yes, I was thinking of this, or making a modular design where a second drive can slot under this one.
The one I shared above was made in parts , and is a bit of a prototype really, but I think the whole thing can be printed as 1 whole enclosure. The same goes for a double enclosure, as the dimensions fit within the limits of a standard 3d printer.
Also, the Matt effect was achieved by spraying it with primer and painting it with black acrylic.
__________________
And beyond it, the deep blue air, that shows
Nothing, and is nowhere, and is endless.
https://jbizzel.itch.io/
And beyond it, the deep blue air, that shows
Nothing, and is nowhere, and is endless.
https://jbizzel.itch.io/
-
Derek_Stewart
- Font of All Knowledge
- Posts: 3975
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: Floppy enclosure 3d print
Yes, of course. I only had yellow at the time. I've ordered some Matt black pla.
__________________
And beyond it, the deep blue air, that shows
Nothing, and is nowhere, and is endless.
https://jbizzel.itch.io/
And beyond it, the deep blue air, that shows
Nothing, and is nowhere, and is endless.
https://jbizzel.itch.io/