Page 1 of 6
ql+ prototype rebuild ? possible
Posted: Sat Feb 03, 2024 10:58 am
by techy
Hi forum ,
Is there anyone who knows where to get info on the ql+ prototype rebuild ?
Rick Dickinsons designed it , it was discussed in Paul Atkinsons book "delete" .
i have the 3d files to make the case ....But lack futher information .
i am also interested in a pdf of the book "delete" in which this ql is described
anyone ??
Re: ql+ prototype rebuild ? possible
Posted: Sun Feb 04, 2024 10:34 am
by Derek_Stewart
Hi,
The book was sub-titled "Vaporware", so maybe the designs were only done in draft mode and only talked about.
If you can upload a picture, I maybe could do some design work to try and emulate Rick's master pieces.
Re: ql+ prototype rebuild ? possible
Posted: Tue Feb 06, 2024 12:18 pm
by techy
i have the 3d parts ready for printing ,
would like to have a copy of the book too .
Techy
Re: ql+ prototype rebuild ? possible
Posted: Tue Feb 06, 2024 12:53 pm
by dilwyn
Quickly googled the book just now, it seems to be going for really silly prices on Amazon and eBay, like £170 per copy. Would love a copy myself, but not at those prices. I looked to see if it was available as an eBook, but it doesn't seem that it is.
Assuming I got the right book, was it this one?
- Delete by Paul Atkinson
Re: ql+ prototype rebuild ? possible
Posted: Tue Feb 06, 2024 1:00 pm
by techy
Yep , that is the book .
And indeed the prices are skyhigh .
i wonder if there are pdf's around ??
Re: ql+ prototype rebuild ? possible
Posted: Tue Feb 06, 2024 1:02 pm
by Derek_Stewart
Hi,
I have searched many downable book sources, some legal, some not, only source seems to Amazon.
Did you design the 3D files your self?
Re: ql+ prototype rebuild ? possible
Posted: Tue Feb 06, 2024 3:11 pm
by Andrew
dilwyn wrote: ↑Tue Feb 06, 2024 12:53 pm
I looked to see if it was available as an eBook, but it doesn't seem that it is.
I think you can still buy the ebook here
https://press.uchicago.edu/ucp/books/bo ... 20557.html
Re: ql+ prototype rebuild ? possible
Posted: Tue Feb 06, 2024 3:38 pm
by desin
Paperback version
https://www.orellfuessli.ch/shop/home/a ... 1026727409
Hardback / Hardcover version
https://www.orellfuessli.ch/shop/home/a ... 1028800312
don't know if its really available
the online shop may be not up to date
Greetings from Switzerland
Markus
Re: ql+ prototype rebuild ? possible
Posted: Tue Feb 06, 2024 8:21 pm
by techy
Derek ,
no i used a design which was mailed to me already some time ago .
I finaly got time to sort out all files ( some good some bad and even some un-usable ) ,
so now the thing i am looking for is a ql tophalf with keyboard ( for cheaps ) it needs to be sawn in pieces to fit the 3d case .
i hope to get a quote on the case pieces soon ( i have selected white - so natural color - as that is the cheapest ).
the design i got has been cut down to home 3d printer size , so there will be some glueing and filling and sanding to do before i can paint it .
black is black , but there is also the dome and that color is not clear to me ................yet
Re: ql+ prototype rebuild ? possible
Posted: Wed Feb 07, 2024 7:32 am
by techy
Just got the quote from the 3d printer ..........................
a whopping € 198,- excl. postal for the parts.
apparently plastic is expensive these days .