Hi aalea,aalea wrote: ↑Mon Oct 09, 2023 7:41 pmPlease, be aware that the GAL files on my github are not the original one, but a compatible ones (only with minerva and only without aditional RAM) the original GAL that other people indicate me that work correctly with this PCB are in this forum.Derek_Stewart wrote: ↑Thu Oct 05, 2023 9:24 pm Hi Mike,
The PALs for Trump Card 2 Clone, are available on the Github site:
https://github.com/alvaroalea/QL_Trump2 ... -interface
The ROM can be found on the QL Homage, see link above.
The End Cap on the real Trump Card was Black Anodised Steel, I have a couple of end covers, which I was going do a STL file to 3D Print.
But the Trump Card used the Cover as a heat sink for the voltage regulator. So maybe a DC-DC converter, like a TRACO TSR-12450, in place of the 7805 regulator would solve this.
For the case, I design one for the CST, it's here: https://github.com/alvaroalea/QL_CST_FL ... ee/main/3D
It do not match the trump, but include the original file for freecad, anyway I think it's easy to design one from zero than try to adapt it, but fell free to try.
I have no much work to do now, so I will get the Trump Card 2 built and see about getting the GAL code sorted.
I wonder if the GAL code from Truml Card 1 would work, or maybe the Tetroid Trump Card. I will get some GALs ordered..
I use Freecad, can alter the Qdisk v4 case file.
I only increased the length of the Sinclair Expansion Cover to suit the Trump Card. I do not have a 3D Printer so can not test the modified cover.