Code: Select all
https://www.pcbway.com/project/shareproject/OqtaDrive_QL_v1_2_5bca1c12.html
The issues with the pre-made image for me was, if i remember correctly that raspberry pi hanged, it never got to the point where it would connect to the wireless network (i did setup the wpa_supplicant.conf and all, but no luck). I don't remember at which exact step it stopped (I used the HDMI output to check what was happening, but I forgot the exact details).
If I set the baud rate to 1000000, I don't get time="2023-12-01T14:30:20+01:00" level=debug msg="ping from QL" in the logs, but everything else looks normal. I tested the 1000000 over USB and Arduino IDE and it also did not work, so my guess is that It must be something with this particular clone.
This is the newest part of the log I think may be relevant as this seems to be some error code:
time="2023-12-01T14:39:28+01:00" level=debug msg="PUT canceled" code=1 drive=3
And if i remove the flag OLD_NANO=y I get (log no2)