Hi I am looking for Microdrive cables for 2 Microdrives. I know
At least one Microdrive works but having removed them to fit speaker I couldn’t get them back in wiretrap connector on logicboard due to the wire ends being short and not solid . I tried to cut them back and strip and tin but ended up with no success instead shortening cables . My Microdrive wire connectors on Microdrive end appear to be crimp Type . I see on other drives like the ones I have seen listed the wires are wiretrap connector at Microdrive end .
Ideally I would like cables wire traps with desoldered wiretrap connectors from Microdrive ends then I can solder them to mine
Thanks
Wanted Microdrive cables
Re: Wanted Microdrive cables
For microdrive cable you can use this cable from Farnell
https://ie.farnell.com/te-connectivity/ ... dp/1310329
https://ie.farnell.com/te-connectivity/ ... dp/1310329
Re: Wanted Microdrive cables
Is this going to be long enough as only 2 inches long and the mdv1Andrew wrote:For microdrive cable you can use this cable from Farnell
https://ie.farnell.com/te-connectivity/ ... dp/1310329
Mdv2 cables look to be around 4 inches
Re: Wanted Microdrive cables
Ian Gledhill used them and said that are long enough and longer will not fit in the QLRaptor wrote: Is this going to be long enough as only 2 inches long and the mdv1
Mdv2 cables look to be around 4 inches
farnell also sells 7.5 and 10 inches long
See discussion here on FB https://www.facebook.com/groups/3069939 ... 221752075/