Hi, Has anyone successfully attached a Gotek drive with the Flashfloppy firmware to a Sinclair QL. Is there a blank disk file I can use as a template and what options are set up in the config file/jumpers.
Any advice would be appreciated.
Cheers,
Andy.
FlashFloppy and the Sinclair QL
-
- ROM Dongle
- Posts: 10
- Joined: Sun Feb 08, 2015 5:05 pm
-
- ROM Dongle
- Posts: 10
- Joined: Sun Feb 08, 2015 5:05 pm
Re: FlashFloppy and the Sinclair QL
Finally got around to adapting the Gotek drive and looking to use it to replace a failing drive in a Miracle Systems Twin-Drive unit (Please don't shoot me!).
The Miracle Systems drives are NEC FD1037A drives and have a slider switch at the back. I thought this would be the drive select but there appears to be several positions. Does anyone know what each switch position means. I want the Gotek as the main drive and the floppy as the 2nd drive.
Any help would be appreciated.
Also, I don't suppose anyone has a blank disk image I could use with the Gotek or one with Quill, Abacus, Easel & Archive on.
Cheers,
Andy.
The Miracle Systems drives are NEC FD1037A drives and have a slider switch at the back. I thought this would be the drive select but there appears to be several positions. Does anyone know what each switch position means. I want the Gotek as the main drive and the floppy as the 2nd drive.
Any help would be appreciated.
Also, I don't suppose anyone has a blank disk image I could use with the Gotek or one with Quill, Abacus, Easel & Archive on.
Cheers,
Andy.