New microdrive internal replacement
Re: New microdrive internal replacement
Thank you
Hope in a week or perhaps 2, to implement the next feature (TODO), different screen modes.
Then ... we'll play around a little about sound emulation and some extra sound features.
And... last one from my side about MDP, the WiFi or Bluetooth file transfer.
After that, from my side, I want to work around about keyboard, mouse, video and sound systems to add to the QL low cost solutions
Hope in a week or perhaps 2, to implement the next feature (TODO), different screen modes.
Then ... we'll play around a little about sound emulation and some extra sound features.
And... last one from my side about MDP, the WiFi or Bluetooth file transfer.
After that, from my side, I want to work around about keyboard, mouse, video and sound systems to add to the QL low cost solutions
Re: New microdrive internal replacement
Here is the last firmware update (from my kitchen),
Again... no responsabilities at all on Dr. Gusman, and its use is under your own risk.
So ... what's new?
You can define a default file to autoload on booting the QL.
I didn't full test the saving changes on autoload image ( due to Keyboard issues), so be aware about it please.
Screens mode will be possible this week or perhaps next.
Again... no responsabilities at all on Dr. Gusman, and its use is under your own risk.
So ... what's new?
You can define a default file to autoload on booting the QL.
I didn't full test the saving changes on autoload image ( due to Keyboard issues), so be aware about it please.
Screens mode will be possible this week or perhaps next.
Re: New microdrive internal replacement
Breaking news.
Just new shape that fits the original cartridges boxes.
Doing some tests about electrical issues that could appear due to some modifications on the side guides, all looks fine
As soon as possible I will share the Gerbers.
News:
About new firmware that allows to change the screen modes, I couldn't work on it farther than refactoring code to make it easier. Hope next month.
After it... I will try to afford the sound system or the Bluetooth images transfer. No new Driver will be needed.
Cheers
Just new shape that fits the original cartridges boxes.
Doing some tests about electrical issues that could appear due to some modifications on the side guides, all looks fine
As soon as possible I will share the Gerbers.
News:
About new firmware that allows to change the screen modes, I couldn't work on it farther than refactoring code to make it easier. Hope next month.
After it... I will try to afford the sound system or the Bluetooth images transfer. No new Driver will be needed.
Cheers
Re: New microdrive internal replacement
Hi all one.
Little modifications on the board that already are tested.
Driver:
Cartridge
Ver 1.4B
Also there is my last firmware version. Just in case it is lost somewhere
I have tested all with my tools, but use them under your own risk.
Little modifications on the board that already are tested.
Driver:
- Added safety electrical border area.
- UX is separated from IDC connector in order to revise or to change it in case of damage.
- IDC has some holes under it to open it easily.
- Screws area now have a non electrical surface, that allows to screw original one without the need of a washer screw
- Transistor footprint for Sound System now is the correct one.
Cartridge
Ver 1.4B
- Added safety electrical border area.
- Shorter wings in order to store in the Microdrive boxes.
- Added Safety electrical border area.
Also there is my last firmware version. Just in case it is lost somewhere
I have tested all with my tools, but use them under your own risk.
- Attachments
-
- MPD Firmware 1.2 RC5.zip
- (39.37 KiB) Downloaded 9 times
-
- Gerbers.zip
- (225.42 KiB) Downloaded 12 times
Last edited by Popopo on Wed Apr 10, 2024 2:01 pm, edited 1 time in total.
-
- Over Heated PSU
- Posts: 147
- Joined: Tue Nov 30, 2021 1:19 am
Re: New microdrive internal replacement
In comparison to topics with more posts over longer time, this number does not appear like actual views.
Re: New microdrive internal replacement
Maybe it was an attempt at improving scripting skills...
Re: New microdrive internal replacement
Breaking news.
Las versions for Driver and Cartridges (long and short wings) will be published soon. I have no plans for modify those last versions. I Think they are great and with the perfect shape if they pass the tests.
Some modifications on the firmware too.
+ New Screen modes
+ Changes on the behavior
+ Inner code changes
+ Some sound features (little changes capabilities but not sound emulation due to I cannot manage (yet) DMA control).
After it and till summer, will work in the bluetooth version. it won't need to change the driver at all. So the solution that I will try to implement (for sure possible) is the file/image transfer using a cartridge with bluetooth module directly. No screen or buttons needs. That implies also to develop some APPs for cellphones and computers. Computers will come first thanks to Java. Phone later due to my lack of experience developing for those systems... but will come too.
Here I leave my last firmware version in case someone wants to use it.
Las versions for Driver and Cartridges (long and short wings) will be published soon. I have no plans for modify those last versions. I Think they are great and with the perfect shape if they pass the tests.
Some modifications on the firmware too.
+ New Screen modes
+ Changes on the behavior
+ Inner code changes
+ Some sound features (little changes capabilities but not sound emulation due to I cannot manage (yet) DMA control).
After it and till summer, will work in the bluetooth version. it won't need to change the driver at all. So the solution that I will try to implement (for sure possible) is the file/image transfer using a cartridge with bluetooth module directly. No screen or buttons needs. That implies also to develop some APPs for cellphones and computers. Computers will come first thanks to Java. Phone later due to my lack of experience developing for those systems... but will come too.
Here I leave my last firmware version in case someone wants to use it.
-
- ROM Dongle
- Posts: 28
- Joined: Mon Jan 09, 2017 3:16 pm
Re: New microdrive internal replacement
hello
need help in the parts required to mount the boards not shown or clear
the two screws/ header and the idc cable required
regards
john davis uk
need help in the parts required to mount the boards not shown or clear
the two screws/ header and the idc cable required
regards
john davis uk