martyn_hill wrote:Good stuff, Vitaliy!
A re-read suggests that you might also want to highlight the implication of the QubIDE/QubATA address-space being fixed at 0C000h - namely that external plug-in ROMs will no longer be recognised, e.g.:
"Because of the need to ensure compatibility of QUBIDE/QUBATA and Trump card, the QUBIDE address-space is fixed at 0C000h. This means that the external ROM port will no longer be usable and any ROM cartridge plugged-in will not be detected by the QL."
Of course, I'm assuming that this is accurate
As for the 'Easy removing hole' - I must admit to not being sure what you intended here. Try writing in Russian and I'll use Google translate to try to gather the meaning...
You are right of course that HD/ED diskettes would require further development, including the ROM driver upgrade that didn't appear until Super/GoldCard. A nice future feature request, perhaps!
I'd be happy to proof-read an updated, full manual in due course...
Finally, how do we order the interface - I want at least one!
Thank you, Martin.
I corrected and put ( change ) to ptevious post.
About hole :
This is for remove ( disconnect ) TDI, old version has length only to the end of QL case and hard to removing.
I added several mm of board and made this hole, to take fingers or screw-driver or other suitable subject to hold a board and remove.
I will make some boards and list ASAP.