Page 1 of 1

Network Access Server - NAServe

Posted: Fri Dec 22, 2017 2:44 pm
by Martin_Head
This is a Network Access Server for the Black Box QL. It performs a similar function to FSERVE, but blocks access to devices and files on the server. Unless they are specifically shared.

It has been back ported from my IP Network Device driver. And includes a few other Network improvements from that driver. And I have also included a preliminary manual.

This is a beta version, and I would appreciate any feedback. I have been testing with a Trump Card and a Gold Card, using SMSQ/E and JS Roms.

The program currently makes an assumption about the location of a device drivers linkage block. So I would like to know if causes problems with other QL setups. (Thor’s, QXL cards, etc)

Re: Network Access Server - NAServe

Posted: Mon Dec 25, 2017 9:07 pm
by martyn_hill
Very nice piece of software, Martin - thank you!

With more new-old users coming back to the original QL, I reckon the native networking of the QL will start to get more use :-)

Re: Network Access Server - NAServe

Posted: Mon Jan 08, 2018 10:31 am
by Martin_Head
There has not been any feedback about problems. So, working on the principle of, No news is good news. I will give it a few more days, Then slap V1.00 on it, do a manual, and release it with the source code.

Re: Network Access Server - NAServe

Posted: Sun Jan 14, 2018 10:27 am
by Martin_Head
OK so here is Version 1.00

The Zip file contains NAServe itself, The source code, And a manual in Open Office & PDF formats.