Sandy SuperQBoard HD

Nagging hardware related question? Post here!
mk79
Chuggy Microdrive
Posts: 74
Joined: Sun Feb 02, 2014 10:54 am

Sandy SuperQBoard HD

Postby mk79 » Mon Jan 08, 2018 11:16 pm

Hi everybody,

I described my quest for a HD capable Sandy SuperQBoard here:

https://www.kilgus.net/2018/01/09/sandy-superqboard-now-in-hd/

Enjoy ;) (I will monitor this thread, too, in case there are comments/questions)


Dave
SandySuperQDave
Posts: 1549
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: Sandy SuperQBoard HD

Postby Dave » Tue Jan 09, 2018 4:34 am

Good job.

The VL1772 are far more reliable double clocked than the WD1772. That's why I bought huge stocks of them for the SQBv4.


Derek_Stewart
Aurora
Posts: 850
Joined: Mon Dec 20, 2010 11:40 am
Location: Runcorn, Cheshire, UK

Re: Sandy SuperQBoard HD

Postby Derek_Stewart » Tue Jan 09, 2018 9:44 am

mk79 wrote:Hi everybody,

I described my quest for a HD capable Sandy SuperQBoard here:

https://www.kilgus.net/2018/01/09/sandy-superqboard-now-in-hd/

Enjoy ;) (I will monitor this thread, too, in case there are comments/questions)


Hi Marcel,

I have a SuperQBoard, like yours without the Mouse components soldered in, I was going upgrade it, along with the ROM. Maybe I could include your HD Disk upgrade.

I was not sure how the Mouse connector looked on the board. All is clear now.


Regards,

Derek
mk79
Chuggy Microdrive
Posts: 74
Joined: Sun Feb 02, 2014 10:54 am

Re: Sandy SuperQBoard HD

Postby mk79 » Wed Jan 10, 2018 10:33 am

Derek_Stewart wrote:Hi Marcel,

I have a SuperQBoard, like yours without the Mouse components soldered in, I was going upgrade it, along with the ROM. Maybe I could include your HD Disk upgrade.

I was not sure how the Mouse connector looked on the board. All is clear now.


Hi Derek,

I've got 8 or so PCBs from China, I can put one in an envelope for you if you want. The ROM probably needs a bit more work to intelligently fill the rest of the 32kb ROM.


Derek_Stewart
Aurora
Posts: 850
Joined: Mon Dec 20, 2010 11:40 am
Location: Runcorn, Cheshire, UK

Re: Sandy SuperQBoard HD

Postby Derek_Stewart » Wed Jan 10, 2018 11:05 am

mk79 wrote:
Derek_Stewart wrote:Hi Marcel,

I have a SuperQBoard, like yours without the Mouse components soldered in, I was going upgrade it, along with the ROM. Maybe I could include your HD Disk upgrade.

I was not sure how the Mouse connector looked on the board. All is clear now.


Hi Derek,

I've got 8 or so PCBs from China, I can put one in an envelope for you if you want. The ROM probably needs a bit more work to intelligently fill the rest of the 32kb ROM.


Hi Marcel,

I have a little work to do at present, but I would like to get my SuperQ Mouse board upgraded to have the mouse working, I have all the required modification details and Sandy ROM required to support the Mouse hardware.


Regards,

Derek

Return to “Hardware”

Who is online

Users browsing this forum: Google [Bot] and 1 guest