QL Issue 5 A18 & A19

Nagging hardware related question? Post here!
Post Reply
User avatar
Whopper
Over Heated PSU
Posts: 126
Joined: Tue Oct 24, 2017 4:04 pm

QL Issue 5 A18 & A19

Post by Whopper »

Sorry about this, but it's stupid question time.

Address lines A18 and A19. Are they used at all? Are they even connected?

A confused Whopper.


You woke me for THAT!!!
User avatar
tofro
Font of All Knowledge
Posts: 2685
Joined: Sun Feb 13, 2011 10:53 pm
Location: SW Germany

Re: QL Issue 5 A18 & A19

Post by tofro »

Connected? Yes. To the CPU and the expansion port.
Used? No, not in an unexpanded QL. They are only needed for expansion cards like memory or I/O.

In case you wonder how the QL internal address decoding circuitry makes sure it's not shadowing the lower 256k of the memory map in upper address space:

It doesn't. At least not by technical means, but rather with two paragraphs in the manual (That's how you build cheap computers!) The QL relies on expansion cards being faster than its own internal address decoding and "grabbing" an address in the upper address range as soon as they see relevant addresses on the bus, then disabling the internal address decoding by asserting DSMC. That (mandatory) mechanism is described on pg. 64 of the Technical Guide

Tobias
Last edited by tofro on Fri Jan 05, 2018 3:48 pm, edited 2 times in total.


ʎɐqǝ ɯoɹɟ ǝq oʇ ƃuᴉoƃ ʇou sᴉ pɹɐoqʎǝʞ ʇxǝu ʎɯ 'ɹɐǝp ɥO
User avatar
Dave
SandySuperQDave
Posts: 2765
Joined: Sat Jan 22, 2011 6:52 am
Location: Austin, TX
Contact:

Re: QL Issue 5 A18 & A19

Post by Dave »

A18 and A19 are pins 8a and 7a on the expansion connector. They are used if you have a memory expansion. Nothing internal to the QL uses them.


User avatar
Whopper
Over Heated PSU
Posts: 126
Joined: Tue Oct 24, 2017 4:04 pm

Re: QL Issue 5 A18 & A19

Post by Whopper »

Thank you both for this information.

Whopper


You woke me for THAT!!!
Post Reply